Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered) 3134

NovaFitness

Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered) 3134

Name: Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered) 3134
Brand: NovaFitness
SKU: PO3134
Price: 33.50 EUR
Availability: InStock

SKU: PO3134

33,50 €

per pack

incl. 19% VAT plus

Net: 28,15 €

Choose tax zone / country of delivery

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: ca. 3 weeks (DE - int. shipments may differ)

Product Information

Product safety information

Manufacturer information:

NovaFitness

, ,
https://eckstein-shop.de/NovaFitness-Marken

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137033421
HAN:	3134
Category:	Tic Stepper Motor Controllers
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	3,81 × 2,67 × 1,19 cm

Product Description

Overview

The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates an MPS MP6500 driver and ships with soldered header pins and terminal blocks. It can operate from 4.5 V to 35 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).

Features and specifications

Open-loop speed or position control of one bipolar stepper motor
A variety of control interfaces:
- USB for direct connection to a computer
- TTL serial operating at 5 V for use with a microcontroller
- I²C for use with a microcontroller
- RC hobby servo pulses for use in an RC system
- Analog voltage for use with a potentiometer or analog joystick
- Quadrature encoder input for use with a rotary encoder dial, allowing full rotation without limits (not for position feedback)
- STEP/DIR inputs for compatibility with existing stepper motor control firmware
Acceleration and deceleration limiting
Maximum stepper speed: 50,000 steps per second
Very slow speeds down to 1 step every 200 seconds (or 1 step every 1428 seconds with reduced resolution).
Selectable microstep modes up to 1/256-step resolution:
- The Tic 36v4 supports full-step to 1/256-step modes
- The Tic T825, Tic T834, and T249 support full-step to 1/32-step modes
- The Tic T500 supports full-step to 1/8-step modes
Digitally adjustable current limit
Optional safety controls to avoid unexpectedly powering the motor
Input calibration (learning) and adjustable scaling degree for analog and RC signals
5 V regulator (no external logic voltage supply needed)
Optional limit switch inputs with homing capabilities
Optional kill switch inputs
STEP/DIR outputs for controlling external stepper motor drivers
Connects to a computer through USB via a USB A to Micro-B cable (not included)
Free configuration software available for Windows, Linux, and macOS
Arduino library makes it easy to get started using these controllers with an Arduino or compatible board
Comprehensive user’s guide

Dimensions

Size:1.50? × 1.05? × 0.47?
Weight:8.2 g

General specifications

Model:Tic T500
Motor driver:MP6500
Control interface:
- USB; non-inverted TTL serial; I²C;
- RC servo pulses; analog voltage; quadrature encoder
Minimum operating voltage:4.5 V¹
Maximum operating voltage:35 V
Continuous current per phase:1.5 A²
Maximum current per phase:2.5 A³
Maximum step rate:50000 PPS
Microstep resolutions:full, 1/2, 1/4, and 1/8
Reverse voltage protection?:Y
Connectors soldered?:Y

Identifying markings

PCB dev codes:tic03a, tic03b
Other PCB markings:0J11038, 0J11910

Notes:

Powering the Tic T500 with a supply voltage between 4.5 V and 5.5 V might cause its logic voltage to be lower than normal, which could affect operation. See the user’s guide for more information.
Without a heat sink or forced air flow.
With sufficient additional cooling.

Write the first review for this item and help others make a purchase decision!

Tic Stepper Motor Controller User's Guide

Manufacturer according to GPSR
NovaFitness, https://eckstein-shop.de/NovaFitness-Marken
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered) 3134

Dimensions and Weight

Features and specifications

Tic Stepper Motor Controller User's Guide

Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered) 3134

Service package

Services for business customers