Pololu Tic T500 USB Multi-Interface Stepper Motor Controller

Pololu Tic T500 USB Multi-Interface Stepper M

NovaFitness

Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered) 3134

Name: Pololu Tic T500 USB Multi-Interface Stepper Motor Controller (Connectors Soldered) 3134
Brand: NovaFitness
SKU: PO3134
Price: 41.59 EUR
Availability: InStock

Item No.: PO3134

HAN: 3134

EAN: 4060137033421

HS Code: 8542311100

Herkunftsland: US

Lagerstufe: Maintain

41,59 €

per pack

incl. 19% VAT plus (S)

Net: 34,95 €

Choose tax zone / country of delivery

Description
Reviews

Product Description

Overview

The Tic T500 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using our free software. The controller supports six control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), quadrature encoder, and hobby radio control (RC). This version incorporates an MPS MP6500 driver and ships with soldered header pins and terminal blocks. It can operate from 4.5 V to 35 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (or 2.5 A max with sufficient additional cooling).

Features and specifications

Open-loop speed or position control of one bipolar stepper motor
A variety of control interfaces:
- USB for direct connection to a computer
- TTL serial operating at 5 V for use with a microcontroller
- I²C for use with a microcontroller
- RC hobby servo pulses for use in an RC system
- Analog voltage for use with a potentiometer or analog joystick
- Quadrature encoder input for use with a rotary encoder dial, allowing full rotation without limits (not for position feedback)
- STEP/DIR inputs for compatibility with existing stepper motor control firmware
Acceleration and deceleration limiting
Maximum stepper speed: 50,000 steps per second
Very slow speeds down to 1 step every 200 seconds (or 1 step every 1428 seconds with reduced resolution).
Selectable microstep modes up to 1/256-step resolution:
- The Tic 36v4 supports full-step to 1/256-step modes
- The Tic T825, Tic T834, and T249 support full-step to 1/32-step modes
- The Tic T500 supports full-step to 1/8-step modes
Digitally adjustable current limit
Optional safety controls to avoid unexpectedly powering the motor
Input calibration (learning) and adjustable scaling degree for analog and RC signals
5 V regulator (no external logic voltage supply needed)
Optional limit switch inputs with homing capabilities
Optional kill switch inputs
STEP/DIR outputs for controlling external stepper motor drivers
Connects to a computer through USB via a USB A to Micro-B cable (not included)
Free configuration software available for Windows, Linux, and macOS
Arduino library makes it easy to get started using these controllers with an Arduino or compatible board
Comprehensive user’s guide

Dimensions

Size:1.50? × 1.05? × 0.47?
Weight:8.2 g

General specifications

Model:Tic T500
Motor driver:MP6500
Control interface:
- USB; non-inverted TTL serial; I²C;
- RC servo pulses; analog voltage; quadrature encoder
Minimum operating voltage:4.5 V¹
Maximum operating voltage:35 V
Continuous current per phase:1.5 A²
Maximum current per phase:2.5 A³
Maximum step rate:50000 PPS
Microstep resolutions:full, 1/2, 1/4, and 1/8
Reverse voltage protection?:Y
Connectors soldered?:Y

Identifying markings

PCB dev codes:tic03a, tic03b
Other PCB markings:0J11038, 0J11910

Notes:

Powering the Tic T500 with a supply voltage between 4.5 V and 5.5 V might cause its logic voltage to be lower than normal, which could affect operation. See the user’s guide for more information.
Without a heat sink or forced air flow.
With sufficient additional cooling.