WaveShare 2-Channel Isolated CAN FD Expansion HAT for Raspbe

WaveShare 2-Channel Isolated CAN FD Expansion

Waveshare

WaveShare 2-Channel Isolated CAN FD Expansion HAT for Raspberry Pi, Multi Protections

Item No.: WS17075

HAN: 17075

EAN: 4060137072833

HS Code: 8473302000

Herkunftsland: CN

Lagerstufe: Tier3

5.0 / 1 review

55,92 €

per pcs

incl. 19% VAT plus (XL)

Net: 46,99 €

Choose tax zone / country of delivery

Product Description

The 2-CH CAN FD HAT is a 2-Channel CAN bus expansion HAT designed for Raspberry Pi, supports CAN FD (CAN with Flexible Data-Rate). It will enable CAN bus for your Raspberry Pi, not only the original CAN 2.0 protocol, but also the CAN FD extension, with higher data throughput.

Thanks to multi onboard protection circuits, including 500W lightningsurge, ESD protection, short circuit protection, and electrical isolation, it make the communication more safe and more reliable.

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
Supports both traditional CAN2.0 and CAN FD protocols
Breakout SPI control pins, for connecting with host control boards like STM32/Arduino
Onboard electrical isolation, up to 5KV isolated voltage, stable operation, higher anti-interference capability
Onboard lightningproof, ESD protection, short circuit protection, more safe communication
Onboard voltage translator, select 3.3V/5V operating voltage by jumper
Onboard 120Ω terminal resistor, configured by jumper
Comes with development resources and manual (examples for Raspberry Pi/Arduino)

Specifications

CAN controller: MCP2518FD
CAN transceiver: MCP2562FD
Control bus: SPI
Power supply: External power supply terminal OR Raspberry Pi
Screw terminalinput voltage: DC 8~26V
Operating voltage: 5V
Logic level: 3.3V/5V
Dimensions: 65.0 × 56.5mm

What can it do?

enable isolated and stable CAN FD capability for your Raspberry Pi
Designed for Raspberry Pi series
Standard Raspberry Pi 40PIN GPIO header, customized for Raspberry Pi series boards
2-Channel CAN support
MCP2518FD CAN controller + MCP2562FD CAN transceiver
Electrical isolation circuitry safe & stable
SM24CANB TVS diode, ESD protection, transient peak voltage protection
Flexible and handy jumpers
easily select 3.3V / 5V operating voltage, or enable/disable 120Ω terminal resistor, via onboard jumpers

What's On Board

MCP2518FD controller
MCP2562FD transceiver
SI8642ED digital isolator
MP1584EN power chip
RT9193-33 power chip
B0505LS-1W power supply isolation module
Standard Raspberry Pi 40PIN GPIO header
CAN bus screw terminal
External power supply terminal 8~26V DC input
MCU control pins for use with host boards like Arduino
120Ω terminal resistor switch
3.3V/5V logic level switch
CAN operating mode selectionA: CAN_0 and CAN_1 use two separated SPI (default)B: CAN_0 and CAN_1 share a single SPI
Power indicator
2A fast resettable fuse
Power supply reverse-proof diode
Power supply flow backward proof diode
Freewheeling diode
SM24CANB TVS diode

Lieferumfang

2-CH CAN FD HAT x1
2×20PIN female header x1
Standoffs pack (2pcs) x1

Technical documents / Downloads

WikiManufacturer WikiOpen

Average item rating

Share your experiences with other customers!

All reviews:

How do reviews work?

Total entries: 1

14.05.2022 Verified purchase Voucher received

Montieren, Installtionsanleitung ausführen, läuft.

Ich habe das CAN Interface auf Raspberry 3B und Raspberry 2B in Betrieb genommen. Jeweils mitDebian 10 (buster). Läuft auf Anhieb. Kann CAN 2.0A, B und FD. Es werden alle mechanische Montageteile mitgeliefert. Durch den Adapter sind alle GPIO Pins des Raspberry zugänglich.
Wie bei Eckstein gewohnt, sind die Teile gut verpackt.

Robert B

Wiki

Manufacturer according to GPSR
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/