Pololu DRV8434S SPI Stepper Motor Driver Carrier 2A Max. Current Limit

Pololu

Pololu DRV8434S SPI Stepper Motor Driver Carrier 2A Max. Current Limit

Name: Pololu DRV8434S SPI Stepper Motor Driver Carrier 2A Max. Current Limit
Brand: Pololu
SKU: PO3768
Price: 15.41 EUR
Availability: InStock

SKU: PO3768

15,41 €

per pcs

incl. 19% VAT plus

Net: 12,95 €

Choose tax zone / country of delivery

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: ca. 3 weeks (DE - int. shipments may differ)

Description
Reviews

Product Information

Product safety information

Manufacturer information:

Pololu Corporation
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137080296
HAN:	3768
Category:	Stepper Motor Driver
Storage Tiers:	Maintain
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	2,03 × 1,52 × 0,40 cm

Product Description

This breakout board for TI’s DRV8434S microstepping bipolar stepper motor driver operates from 4.5 V to 48 V and can deliver up to approximately 1.2 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). The SPI interface allows configuration of the current limit, step mode (11 step modes from full-step through 1/256-step), decay mode, and stall detection. The driver also features built-in protection against under-voltage, over-current, and over-temperature conditions. This version of has the maximum current limit set to a fixed 2A, and SPI can be used to set the actual current limit to any of 16 evenly spaced values from 125 mA up to 2 A (i.e. in increments of 125 mA).

This product is a carrier board or breakout board for the DRV8434S stepper motor driver from Texas Instruments (TI); we therefore recommend careful reading of the DRV8434S datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to approximately 1.2 A per phase continuously without a heat sink or forced air flow.

Features

4.5 V to 48 V supply voltage range
Can deliver 1.2 A per phase continuously without additional cooling
Can interface directly with 1.8 V, 3.3 V, and 5 V systems
Highly configurable through SPI interface
Optional STEP/DIR control pins (stepping can also be controlled through SPI interface alone)
Eleven different step resolutions: full-step with 100% current, full-step with 70% current, non-circular 1/2-step, 1/2-step, 1/4-step, 1/8-step, 1/16-step, 1/32-step, 1/64-step, 1/128-step, 1/256-step
Eight configurable decay modes, including smart tune dynamic decay and ripple control modes
Two current limit control options available, each with two header pin assembly options, making four versions in all:
- Potentiometer for Max. Current Limit: an on-board potentiometer sets the maximum current limit up to 2 A, and the actual current limit can be scaled down through SPI
  - with header pins included but not soldered
  - with header pins soldered
- 2A Max. Current Limit: the maximum current limit is fixed at 2A and the actual current limit is set solely through SPI in increments of 125 mA
  - with header pins included but not soldered
  - with header pins soldered
Integrated stall detection
Over-temperature thermal shutdown, over-current protection, open load detection ,under-voltage lockout, and charge pump over-voltage protection
Driver IC integrates spread spectrum clocking of its internal oscillator and charge pump for reduced EMI
4-layer, 2 oz copper PCB for improved heat dissipation
Exposed solderable ground pad below the driver IC on the bottom of the PCB

This product ships with all surface-mount components—including the DRV8434S driver IC—installed as shown in the product picture.

Dimensions

Size: 0.6? × 0.8?
Weight: 1.3 g. Without included optional headers.

General specifications

Minimum operating voltage: 4.5 V. Inputs below 6 V reduce the maximum settable current limit. With 4.5 V in the maximum settable limit is 1.75 A.
Maximum operating voltage: 48 V
Continuous current per phase: 1.2 A. Without a heat sink or forced air flow.
Maximum current per phase: 2 A. With sufficient additional cooling.
Minimum logic voltage: 1.8 V. Logic high threshold varies for two-state, tri-state, and quad-state pins.
Maximum logic voltage: 5.5 V. Absolute maximum voltage on any input is 5.75 V.
Microstep resolutions: full with 100% current, full with 70% current, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
Current limit control: fixed 2A max with SPI scaling
Reverse voltage protection?: N
Header pins soldered?: N

Write the first review for this item and help others make a purchase decision!

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Pololu DRV8434S SPI Stepper Motor Driver Carrier 2A Max. Current Limit

Dimensions and Weight

Pololu DRV8434S SPI Stepper Motor Driver Carrier 2A Max. Current Limit

Service package

Services for business customers