Pololu Basic SPDT Relay Carrier with 12VDC Relay (Partial Kit) 1-Kanal Relais Modul

Pololu

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Partial Kit) 1-Kanal Relais Modul

SKU: PO2483

7,98 €

per pack

incl. 19% VAT plus

Net: 6,71 €

Choose tax zone / country of delivery

From

Unit price / pack

7,98 € (Net: 6,71 €)

7,51 € (Net: 6,31 €)

7,06 € (Net: 5,93 €)

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: 11 - 13 Workdays (DE - int. shipments may differ)

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5LE-14-DC12 12 V relay, 5.0 mm terminal blocks, and 0.1" male headers in straight and right-angle versions. Surface-mount components are pre-assembled on the PCB, but the through-hole components are not installed. The included power relay is rated for up to 10 A under most conditions. More product details

Product Information

Product safety information

Manufacturer information:

Pololu Corporation
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137032417
HAN:	2483
Category:	Relay
Shipping weight:	0,02 kg
Item weight:	0,02 kg

Product Description

Overview

The Pololu basic relay carrier modules make it easy to control a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. The modules are available with 5 V and 12 V power relays-Omron G5LE-14-DC5 and G5LE-14-DC12, respectively-and they are available pre-soldered or as partial kits that allow greater application flexibility.

The carrier board is available without the relay or connectors for those preferring to use their own relays that have the common “sugar cube” pinout and footprint, and we also offer several dual-relay carrier modules.

The carrier board routes the three relay control pins to 0.1"-spaced pins compatible with standard solderless breadboads and female servo cable connectors. The assembled version of this board has a 0.1" straight male header soldered to these pins while the partial kit version includes 8×1 straight and right angle 0.1" male header strips that can optionally be broken into 3×1 pieces and soldered in. The relay switch pins are routed to a set of large pads intended for use with a 3-pin 5mm-pitch terminal block and a set of smaller pads with a 0.2" pitch, making them compatible with 0.1" perfboards. The assembled version of this board has a terminal block soldered to these pins while the partial kit version includes a 3-pin terminal block that can be optionally soldered in. The carrier board has four mounting holes that work with #2 or M2 screws.

Advantages over similar products

Compact layout
Two LEDs to indicate coil actuation
Zener diode for fast current decay on relay coil
Specification of electrical routing clearance rules on relay switch nodes

Dimensions

Size:	1" × 1.15" × 0.1"
Weight:	16 g

General specifications

Voltage:	12 V
Partial kit?:	Y

Comparison to the dual-channel version

Our basic relay carrier boards are available in single-channel and dual-channel versions. The single-relay carrier is less than half the size of the 2-channel carrier (due in part to its smaller mounting holes and lack of barrel jack footprints), so it might be more appropriate to use two single-channel boards instead of one 2-channel board in some space-constrained applications. The following table shows some of the key differences between the two versions:

	Voltage options	Board size	Mounting hole size	# of channels	DC power jack option
Single-relay carrier	5 V and 12 V	1.15" × 1"	0.086" (#2 or M2)	1	no
Dual-relay carrier	5 V and 12 V	1.5" × 1.8"	0.125" (#4 or M3)	2	yes

Using the relay module

The switch portion of the relay is accessible on one side of the board while the control pins are routed to the other. The relay coil is powered by supplying the appropriate coil voltage for your specific relay across the VDD and GND pins, and it is activated by a digital high control signal on the EN pin. The control signal is fed directly to a BSS138 N-channel MOSFET, which in turn actuates the relay coil when the control voltage exceeds approximately 2.5 V, up to a maximum of 20 V (see BSS138 datasheet for details).

The relay switch terminals COM (common), NO (normally open), and NC (normally closed) are routed on the PCB with a minimum clearance of 60 mils (1.5 mm) from other copper. The copper traces are designed to be at least 45 mil (1.1 mm) from the board edges, though manufacturing variations in the board edges can make those distances slightly lower.

In most applications, the current and voltage ratings for the module will match the ratings of the relay used. Maximum current, maximum voltage, and life expectancy are interdependent; we therefore recommend careful examination of your relay’s datasheet.

Warning: This product is not designed to or certified for any particular high-voltage safety standard. Working with voltages above 30 V can be extremely dangerous and should only be attempted by qualified individuals with appropriate equipment and protective gear.

PACKAGE LIST

1x Pololu Basic SPDT Relay Carrier with 12VDC Relay (Partial Kit)

Write the first review for this item and help others make a purchase decision!

Schematic diagram

Omron G5LE datasheet

BSS138 N-channel MOSFET datasheet

Drill guide

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Partial Kit) 1-Kanal Relais Modul

Dimensions and Weight

Overview

Advantages over similar products

Dimensions

General specifications

Comparison to the dual-channel version

Using the relay module

PACKAGE LIST

Schematic diagram

Omron G5LE datasheet

BSS138 N-channel MOSFET datasheet

Drill guide

Pololu Basic SPDT Relay Carrier with 12VDC Relay (Partial Kit) 1-Kanal Relais Modul

Service package

Services for business customers