Product Description
USB To UART Debugger Module for Raspberry Pi 5, Type-A Port, Onboard UART Connector, High Baud Rate Transmission, Multi Connection Methods, Multi System Support.
Features
- Supports Mac, Linux, Android, Windows 7/8/8.1/10/11
- Onboard self-recovery fuse and Transient Voltage Suppressor, anti-overcurrent and anti-overvoltage, anti-surge, anti-static, improves shock proof performance, stable and safe communication performance
- Onboard IO protection circuits, anti-surge, anti-static, stable and safe communication performance
- Onboard 3.3V and 5V TTL level switch pins for selecting TTL communication level
- Supports 3.3V/5V output (the module is powered by USB, and the onboard jumper should be shorted to 3.3V or 5V accordingly)
- Adopts double-sided black immersion gold process, which is durable and has a good look
Specifications
- HOST INTERFACE: USB
- DEVICE INTERFACE: UART
- COMMUNICATION RANGE: 50bps ~ 6Mbps
- USB DEVICE INTERFACE:
- connector: USB Type-A,
- protection: self-recovery fuse, ESD protection
- UART INTERFACE:
- connector: 6pin right-angle pinheader, 3pin connector
- protection: IO protection diode
Multiple Protection Circuit, Safe And Stable
- Onboard Self-recovery fuse And Transient Voltage Suppressor, Prevents Overcurrent And Overvoltage, Improves shock proof performance, Onboard IO Protection Circuit, Anti Surge, Anti-Static, Stable And Safe Communication Performance
Multiple systems support
- Compatible with popular systems like Win7/8/8.1/10/11, Mac, Linux, Android...
Interface Introduction
- PWR: Power indicator, turns on when voltage is detected from USB interface
- RxD: Receiving indicator, turns on when data is sent back from the device interface
- TxD: Sending indicator, turns on when data is sent from USB
Pinouts Definition
- VCC: 5V or 3.3V output for external device (configured by jumper)
- GND: Ground
- TxD: Connects to MCU.RxD
- RxD: Connects to MCU.TxD
- RTS#: Connects to MCU.CTS
- CTS#: Connects to MCU.RTS
Wiki:www.waveshare.com/wiki/Pi_UART_Debugger
Lieferumfang
- Pi UART Debugger x1
- 6-pin squid cable x1
- SH1.0 connector to 3PIN cable ~100mm x1
- Dual SH1.0 connector 3PIN cable ~100mm x1
