Pololu Shunt Regulator: 13.2V, 1.50Ohm, 15W

Pololu Shunt Regulator: 13.2V, 1.50Ohm, 15W

This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a fixed set point of 13.2 V, a shunt resistance of 1.50 ohms, and a total of 32 SMT shunt resistors populated on both sides of the PCB (this is the higher-power version). An external potentiometer can also be added to change the set voltage.

16,95 € (Net 14,24 € )

In stock

incl. 19% VAT , plus (S)

Choose tax zone / country of delivery

pack

Request personal offer!

Available immediately
Delivery time: 6 - 8 Workdays (DE - int. shipments may differ)

SKU: PO3771
GTIN: 4060137052927
Category: Shunt Regulator
Manufacturers: Pololu
MPN: 3771
Storage Tiers: Maintain

Übersicht

Pololu’s shunt regulators are designed for such scenarios, with fixed values available with ±3% accuracy for some common voltages, and adjustable versions available to accommodate any voltage from approximately 5V to 35V. To use the shunt regulator, install it across (in parallel with) your power supply. Under normal conditions, the supply voltage should be below the set point of the shunt regulator, and the regulator should only draw its quiescent current of less than 0.5 mA. However, any voltage spikes above the set point will cause the shunt regulator to draw substantially more current, dissipating energy and limiting the extent of the voltage change.