Product Description
industrial grade SIM7600G-H 4G DTU, USB UART/RS232/RS485 multi interfaces communication, LTE global band support. Supports USB, UART/RS232/RS485 communication4G/3G/2G dial-up & GNSS positioning, global band support.
Supports communication between USB / serial port (UART/RS232/RS485) and 4G network, supports GNSS positioning, compatible with OS like Windows/Linux. An ideal choice for fields like Raspberry Pi project, industrial control, industrial data collection, and other IoT applications that require 4G network connection.
Features
- 4G DTU development kit designed for industrial applications, allows direct integration or secondary development
- Based on SIM7600G-H communication module, supports global coverage of 4G/3G/2G network
- Supports GPS, Beidou, Glonass, GALILEO, QZSS, and LBS base station positioning
- USB to 4G communication, UART/RS232/RS485 to 4G communication
- 7 ~ 36 V wide range power supply, ideal for industrial applications
- Onboard STM8 MCU for hardware watchdog, allows auto rebooting while the DTU encountering exception
- Multi protection circuits, such as ESD protection, anti-surge, stable and safe communication performance
- Baudrate: 300bps ~ 4Mbps (115200bps by default)
- AT commands support (based on 3GPP TS 27.007, 27.005 and V.25TER command set)
- Aluminum case, oxidized dull polish surface, CNC numerical control opening processing, rugged & elegant
Specifications
Frequency band:
-
4G: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66. LTE-TDD: B34, B38, B39, B40, B41
-
3G: UMTS/HSDPA/HSPA+: B1, B2, B4, B5, B6, B8, B19
-
2G: GSM/GPRS/EDGE: 850, 900, 1800, 1900 MHz
-
GNSS: GPS, Beidou, GLONASS, GALILEO, QZSS
-
Applicable regions: Global support
Data rate
-
4G (LTE Cat-4): 150Mbps(DL) / 50Mbps(UL)
-
3G (HSPA+): 42Mbps(DL) / 5.76Mbps(UL)
-
2G (EDGE): 236.8Kbps(DL) / 236.8Kbps(UL)
-
2G (GPRS): 85.6Kbps(DL) / 85.6Kbps(UL)
Software features
-
Communication protocol: TCP, IP, IPV4, IPV6, Multi-PDP, FTP, FTPS, HTTP, HTTPS, DNS (controlled via AT commands, with module Open Linux SDK for secondary development)
-
OS support: Windows/Linux etc.
Hardware description
-
RS232: connector: DB9 female protection: TVS protection, anti-surge, ESD protection
-
RS485: connector: screw terminals (A, B) protection: 600W lightningproof, anti-surge, and 15KV ESD protection (reserved 120R balancing resistor solder pads)
-
TTL(UART): operating voltage: 3.3V or 5V connector: screw terminals (TXD, RXD, GND)
-
Serial port baudrate: supports 300bps ~ 921600bps, 115200bps by default
-
USB port: operating voltage: 5V connector: Micro USB protection: ESD protection diode usage: parameter configuration, dial-up, firmware upgrade
-
Power input: connector: 7~36V screw terminals or DC 12V jack protection: Schottky diode protection, reverse-proof
-
Hardware protection: embedded MCU, hardware watchdog to prevent system crash, industrial grade aluminum alloy case
-
Operating voltage: 7 ~ 36V DC
-
Operating current: idle: 10~30mA @12V. transmit: 80~450mA @12V (depending on the network condition)
-
Indicator: PWR (power supply), RXD/TXD (UART RX/TX), NET (network), LINK (user-defined)
-
Button: reset button
-
SIM card: standard SIM card (1.8V / 3V)
-
Antenna connector: MAIN LTE, AUX LTE, GNSS
-
Operating temperature: -40? ~ 80?
monitoring the connection and signal status in real time
-
PWR: lights up red when power-on
-
TXD: blinking blue when transmitting data
-
RXD: blinking blue when receiving data
-
NET: blinking green when network connection is established
-
LINK: a user-defined LED
-
RESET: reset button
Wiki: http://www.waveshare.com/wiki/SIM7600G-H_4G_DTU
Lieferumfang
- SIM7600G-H 4G DTU main unit x1
- High gain LTE MAIN antenna (~ 3m) x1
- High gain LTE AUX antenna x1
- GPS antenna x1
- Serial cable male to female (~ 1.5m) x1
- USB-A to micro-B cable (~ 1.2m) x1
- EU 12V 1.0A power adapter x1
also recommended: 12V industrial rail-mount power supply - WS21399
