309, 3F, Block B, Ganfeng Technology Building 1, No.993 Jiaxian Road, Xiangjiaotang Community, Bantian Street,
Shenzhen, China, 518129
[email protected]
https://harztec.com
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137083891 |
HAN: | MSP2807 |
Category: | LCD/TFT |
Interface/Connector: | SPI |
Resolution: | 320x240 |
Form/Type: | LCD/TFT |
Display Size (inch): | 2,8 |
Storage Tiers: | Tier2 |
Platform: | Arduino* |
Touchscreen: | Resistive |
Shipping weight: | 0,03 kg |
Item weight: | 0,03 kg |
Dimensions ( Length × Width × Height ): | 8,60 × 5,00 × 2,00 cm |
Product Description
- 2.8-inch color screen,support 65K color display,display rich colors
- 320X240 resolution, optional touch function
- Using the SPI serial bus, it only takes a few IOs to illuminate the display
- Easy to expand the experiment with SD card slot
- Provide a rich sample program
- Military-grade process standards, long-term stable work
- Provide underlying driver technical support
Product Parameters
- Display Color: RGB 65K color
- SKU: MSP2807
- Screen Size: 2.8(inch)
- Type: TFT
- Driver IC: ILI9341
- Resolution: 320*240 (Pixel)
- Module Interface: 4-wire SPI interface
- Active Area (AA area): 43.2x57.6(mm)
- Module PCB Size: 50.0x86.0(mm)
- Operating Temperature: -20℃~60℃
- Storage Temperature: -30℃~70℃
- VCC power voltage: 3.3V~5V
- Logic IO port voltage: 3.3V(TTL)
- Rough Weight(Package containing): 43(g)
Interface Definition
- VCC: 5V/3.3V power input
- GND: Ground
- CS: LCD chip select signal, low level enable
- RESET: LCD reset signal, low level reset
- DC/RS: LCD register / data selection signal, high level: register, low level: data
- SDI(MOSI): SPI bus write data signal
- SCK: SPI bus clock signal
- LED: Backlight control, high level lighting, if not controlled, connect 3.3V always bright
- SDO(MISO): SPI bus read data signal, if you do not need to the read function, you can not connect it
- T_CLK: Touch SPI bus clock signal
- T_CS: Touch screen chip select signal, low level enable
- T_DIN: Touch SPI bus input
- T_DO: Touch SPI bus output
- T_IRQ: Touch screen interrupt signal, low level when touch is detected
Wiki
Manufacturer according to GPSR
Shenzhen Harztec Technology Co., 309, 3F, Block B, Ganfeng Technology Building 1, No.993 Jiaxian Road, Xiangjiaotang Community, Bantian Street,, 518129 Shenzhen, China, [email protected], https://harztec.com
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de