Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137053511 |
HAN: | 3099 |
Category: | Stepper Motor Driver |
Storage Tiers: | Maintain |
Shipping weight: | 0,01 kg |
Item weight: | 0,01 kg |
Dimensions ( Length × Width × Height ): | 2,00 × 1,52 × 1,00 cm |
This version of our TB67S279FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. The TB67S279FTG has a wide operating voltage range of 10 V to 47 V, and our carrier board can deliver approximately 1.1 A per phase continuously without a heat sink or forced air flow (up to 2 A peak). Please see PO3098 for more information about the driver.
Dimension:
- Size: 0.6'' x 0.8''
- Weight: 1.5 g
General specifications
- Motor driver: TB67S279FTG
- Minimum operating voltage: 10 V
- Maximum operating voltage: 47 V
- Continuous current per phase: 1.1 A
- Maximum current per phase: 2 A
- Minimum logic voltage: 2 V
- Maximum logic voltage: 5.5 V
- Microstep resolutions: full, non-circular 1/2, 1/2, 1/4, 1/8, 1/16, 1/32
- Current limit control: potentiometer
- Reverse voltage protection?: N
- Header pins soldered?: Y
TB67S279FTG datasheet
TB67S279FTG application note
Schematic diagram of the TB67S279FTG Stepper Motor Driver Compact Carrier
Dimension diagram of the TB67S279FTG Stepper Motor Driver Compact Carrier
Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de