SparkFun MicroMod Main Board Single Carrier Board 1

SparkFun MicroMod Main Board Single Carrier Board 2

SparkFun MicroMod Main Board Single Carrier Board 3

SparkFun MicroMod Main Board Single Carrier Board 4

SparkFun MicroMod Main Board Single Carrier B

Sparkfun

SparkFun MicroMod Main Board Single Carrier Board

Name: SparkFun MicroMod Main Board Single Carrier Board
Brand: Sparkfun
SKU: SF20748
Price: 24.58 USD
Availability: InStock

Item No.: SF20748

HAN: DEV-20748

EAN: 4060137082955

HS Code: 8537109199

Herkunftsland: US

Lagerstufe: Maintain

24,58 $

per pcs

incl. 19% VAT plus (M)

Net: 20,66 $

Choose tax zone / country of delivery

Product Description

The MicroMod Main Board - Single is a specialized carrier board that allows you to interface a MicroMod Processor Board with a single MicroMod Function Board. With the M.2 MicroMod connector, connecting your Processor and Function Boards is a breeze. Simply match up the key on your board's beveled edge connector to the key on the M.2 connector and secure the boards with screws.

The Single Main Board includes one USB-C connector for power and programming the Processor Board. A jumper is available on the back of the board to isolate the USB C's shield pin. Two buttons for reset and boot are also populated on the board. Processor Board pins are also broken out as 2x5 SWD pins. Also, included on the board is a 2A resettable fuse and 3.3V/1A voltage regulator. A second 3.3V/500mA voltage regulator is included on the board to power your Qwiic-enabled devices. We've even added convenient PTH jumpers for advanced users looking to bypass the fuse and measure the current consumption on the 5V and 3.3V lines for low-power testing. For those that need to go remote with their application, the board includes a 2-pin JST connector and a single-cell LiPo MCP73831 charge IC (set to a charge rate of 500mA).

Four status LEDs are available for power and charging. These can also be disabled through jumpers. There is a microSD card socket so you can also plug in a microSD card for data logging. The microSD socket can be disabled through the I/O pins. Finally, two Qwiic connectors are populated on the board with built-in pull-up resistors to easily add Qwiic-enabled I²C devices to your projects!

Note: A MicroMod Processor and Function Board are not included with the MicroMod Main Board. These boards will need to be purchased separately.

Includes:

1x MicroMod Main Board - Single
3x Phillips #0 M2.5x3mm Screws

Features:

Input Voltage Range
- 5V via USB C Connector
- ~3.7V to 4.2V via LiPo Battery Connector
Built-in Resettable PTC Fuse (Rated 5V/2A)
AP7361C 3.3V/1A Voltage Regulator
AP7347DQ 3.3V/500mA Voltage Regulator (for Qwiic-Enabled Devices)
Integrated MCP73831 Single Cell LiPo Charge Circuit: 500mA
Ports
- 1x USB Type C Connector
- 1x 2-Pin JST Connector
- M.2 Connectors
  - 1x MicroMod Processor Board
  - 1x MicroMod Function Board
- 2x Qwiic Enabled I²C
- 1x MicroSD Card Socket
- 1x SWD 2x5 Header
Built-in MUX for UART1
Buttons
- 1x Reset
- 1x Boot
LEDs
- 1x VIN
- 1x 3.3V
- 1x Qwiic 3.3V
- 1x CHG
Plated Through Holes
- GND
- SEL
- TXO
- RXI
- RST
- 5V (MEAS)
- VBAT
- 3.3V (MEAS)
Jumpers
- USB SHLD
- 5V MEAS
- 3.3V MEAS
- PTC
- 3.3V EN
- VIN LED
- 3.3V LED
- Qwiic 3.3V LED
- I2C
- Battery Voltage Divider
Board Dimensions: 3.40" x 2.90"

Technical documents / Downloads

WikiManufacturer WikiOpen

Write the first review for this item and help others make a purchase decision!

Wiki

Manufacturer according to GPSR
SparkFun Electronics Inc, Dry Creek Parkway 6333, 80583 Niwot, Colorado, Vereinigte Staaten, [email protected], https://eckstein-shop.de/SparkFun-Marken