SparkFun MicroMod Main Board Double Carrier Board

Sparkfun

SparkFun MicroMod Main Board Double Carrier Board

Name: SparkFun MicroMod Main Board Double Carrier Board
Brand: Sparkfun
SKU: SF20595
Price: 27.31 EUR
Availability: InStock

SKU: SF20595

GTIN:>4060137082948

HAN: DEV-20595

Category: Shields

27,31 €

per pcs

incl. 19% VAT plus

Net: 22,95 €

Choose tax zone / country of delivery

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: 2 - 3 weeks (DE - int. shipments may differ)

Product Information

Product safety information

Manufacturer information:

SparkFun Electronics Inc
Dry Creek Parkway 6333
Colorado
Niwot, Vereinigte Staaten, 80583
[email protected]
https://eckstein-shop.de/SparkFun-Marken

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137082948
HAN:	DEV-20595
Category:	Shields
Storage Tiers:	Maintain
Shipping weight:	0,11 kg
Item weight:	0,09 kg
Dimensions ( Length × Width × Height ):	12,80 × 7,90 × 0,90 cm

Product Description

The MicroMod Main Board - Double is a specialized carrier board that allows you to interface a MicroMod Processor Board with up to two MicroMod Function Boards. With the M.2 MicroMod connector, connecting your Processor and Function Boards is a breeze. Simply match up the key on your board's beveled edge connector to the key on the M.2 connector and secure the boards with screws.

The Double Main Board includes one USB-C connector for power and programming the Processor Board. A jumper is available on the back of the board to isolate the USB C's shield pin. Two buttons for reset and boot are also populated on the board. Processor Board pins are also broken out as 2x5 SWD pins. Also, included on the board is a 2A resettable fuse and 3.3V/1A voltage regulator. A second 3.3V/500mA voltage regulator is included on the board to power your Qwiic-enabled devices. We've even added convenient PTH jumpers for advanced users looking to bypass the fuse and measure the current consumption on the 5V and 3.3V lines for low-power testing. For those that need to go remote with their application, the board includes a 2-pin JST connector and a single-cell LiPo MCP73831 charge IC (set to a charge rate of 500mA).

Two switches have been included to toggle between the general-purpose pins and each Function Board's voltage regulator. A third switch has also been included to switch between different SPI chip select pins on the second Function Board. Four status LEDs are available for power and charging. These can also be disabled through the jumpers. There is a microSD card socket so you can also plug in a microSD card for data logging. The microSD socket can be disabled through the I/O pins. Finally, two Qwiic connectors are populated on the board with built-in pull-up resistors to easily add Qwiic-enabled I2C devices to your projects!

Note: A MicroMod Processor and Function Boards are not included with the MicroMod Main Board. These boards will need to be purchased separately.

Includes:

1x MicroMod Main Board - Double
4x Phillips #0 M2.5x3mm Screws

Features:

Input Voltage Range
- 5V via USB C Connector
- ~3.7V to 4.2V via LiPo Battery Connector
Built-in Resettable PTC Fuse (Rated 5V/2A)
AP7361C 3.3V Voltage Regulator (Rated 1A)
AP7347DQ 3.3V Voltage Regulator (Rated 500mA)
Integrated MCP73831 Single Cell LiPo Charge Circuit: 500mA
Ports
- 1x USB Type C Connector
- 1x 2-Pin JST Connector
- M.2 Connectors
  - 1x MicroMod Processor Board
  - 2x MicroMod Function Boards
- 2x Qwiic Enabled I2C
- 1x MicroSD Card Socket
- 1x SWD 2x5 Header
Built-in MUX for UART1
Buttons
- 1x Reset
- 1x Boot
3x Switches
- Function Board Zero Power Enable Pins
- Function Board One Power Enable Pins
- SPI1 Chip Select Alternative Pins
LEDs
- 1x VIN
- 1x 3.3V
- 1x Qwiic 3.3V
- 1x CHG
Plated Through Holes
- RST
- 5V (MEAS)
- V_BATT
- 3.3V (MEAS)
Jumpers
- USB SHLD
- 5V MEAS
- 3.3V MEAS
- PTC
- 3.3V EN
- VIN LED
- 3.3V LED
- Qwiic 3.3V LED
- I2C
- Battery Voltage Divider
Board Dimensions: 4.90" x 2.90"

Write the first review for this item and help others make a purchase decision!

Wiki

Manufacturer according to GPSR
SparkFun Electronics Inc, Dry Creek Parkway 6333, 80583 Niwot, Colorado, Vereinigte Staaten, [email protected], https://eckstein-shop.de/SparkFun-Marken
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

SparkFun MicroMod Main Board Double Carrier Board

Dimensions and Weight

Wiki

SparkFun MicroMod Main Board Double Carrier Board

Service package

Services for business customers