Raspberry Pi Pico WH - Pico Wireless with Headers Soldered

Raspberry Pi®

Raspberry Pi Pico WH - Pico Wireless with Headers Soldered

Name: Raspberry Pi Pico WH - Pico Wireless with Headers Soldered
Brand: Raspberry Pi®
SKU: RP01072
Price: 11.95 EUR
Availability: InStock

SKU: RP01072

11,95 €

per pcs

incl. 19% VAT plus

Net: 10,04 €

Choose tax zone / country of delivery

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: 9 - 11 Workdays (DE - int. shipments may differ)

Product Information

Product safety information

Manufacturer information:

Raspberry Pi®

, ,
https://eckstein-shop.de/Raspberry-Pi-Marken

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137086861
HAN:	SC0919
Category:	Board
Storage Tiers:	Maintain
Shipping weight:	0,02 kg
Item weight:	0,02 kg
Dimensions ( Length × Width × Height ):	7,30 × 3,20 × 2,00 cm

Product Description

Raspberry Pi Pico WH is just like the classic Pico but adds pre-soldered headers, a new 3-pin debug connector, and an on-board single-band 2.4GHz wireless interfaces (802.11n) using the Infineon CYW4343 while retaining the Pico form factor. The on-board 2.4GHz wireless interface has the following features:

Wireless (802.11n), Single-band (2.4 GHz) WiFi with WPA3 and Soft Access Point supporting up to 4 clients
Bluetooth Low Energy - note this isn't supported in software yet, its just a hardware capability.
The wireless interface is connected via SPI to the RP2040 microcontroller and has a micropython driver for wireless capability

Due to pin limitations (the Pico brings out all the GPIO) some of the wireless interface pins are shared with the exposed pads:

The SPI CLK is shared with VSYS monitor, so only when there isn’t an SPI transaction in progress can VSYS be read via the ADC.
The Infineon CYW43439 SPI DIN/DOUT and IRQ all share one pin on the RP2040. Only when an SPI transaction isn’t in progress is it suitable to check for IRQs.
The interface typically runs at 33MHz.

RP2040 Chip features:

Dual ARM Cortex-M0+ @ 133MHz
264kB on-chip SRAM in six independent banks
Support for up to 16MB of off-chip Flash memory via dedicated QSPI bus
DMA controller
Fully-connected AHB crossbar
Interpolator and integer divider peripherals
On-chip programmable LDO to generate core voltage
2 on-chip PLLs to generate USB and core clocks
30 GPIO pins, 4 of which can be used as analog inputs
Peripherals
- 2 UARTs
- 2 SPI controllers
- 2 I2C controllers
- 16 PWM channels
- USB 1.1 controller and PHY, with host and device support
- 8 PIO state machines

Write the first review for this item and help others make a purchase decision!

Document

Manufacturer according to GPSR
Raspberry Pi®, https://eckstein-shop.de/Raspberry-Pi-Marken
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Raspberry Pi Pico WH - Pico Wireless with Headers Soldered

Dimensions and Weight

Document

Raspberry Pi Pico WH - Pico Wireless with Headers Soldered

Service package

Services for business customers