Pololu DRV8833 Dual Motor Driver Carrier for Two DC Motors 1

Pololu DRV8833 Dual Motor Driver Carrier for

Pololu

Pololu DRV8833 Dual Motor Driver Carrier for Two DC Motors 1.2A per Channel

Name: Pololu DRV8833 Dual Motor Driver Carrier for Two DC Motors 1.2A per Channel
Brand: Pololu
SKU: PO2130
Price: 14.56 USD
Availability: InStock

Item No.: PO2130

HAN: 2130

EAN: 4060137015151

HS Code: 8537109199

Herkunftsland: US

Lagerstufe: Tier3

14,56 $

per pack

incl. 19% VAT plus (S)

Net: 12,23 $

Choose tax zone / country of delivery

Description
Reviews

Product Description

Overview

Texas Instruments’ DRV8833 is a dual H-bridge motor driver IC that can be used for bidirectional control of two brushed DC motors at 2.7 V to 10.8 V. It can supply up to about 1.2 A per channel continuously and can tolerate peak currents up to 2 A per channel for a few seconds, making it an ideal driver for small motors that run on relatively low voltages. The board ships populated with SMD components, including the DRV8833, and adds a FET for reverse battery protection.

This board is very similar to our DRV8835 dual motor driver carrier in operating voltage range and continuous current rating, but the DRV8835 has a lower minimum operating voltage, offers an extra control interface mode, and is 0.1' smaller in each dimension; we also carry a DRV8835 dual motor driver shield that is easy to use with an Arduino. The DRV8833 has a higher peak current rating (2 A per channel vs 1.5 A), optional built-in current-limiting, and no need for externally supplied logic voltage.

For a smaller, lower-cost, single-channel alternative to this driver, please consider our DRV8838 carrier, which offers a similar operating voltage range and current capabilities.

For higher-voltage alternatives to this driver, consider our A4990 and DRV8801 motor driver carriers.

Features

Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
Operating voltage: 2.7V to 10.8V
Output current: 1.2 A continuous (2A peak) per motor
Motor outputs can be paralleled to deliver 2.4A continuous (4A peak) to a single motor
Inputs are 3V- and 5V-compatible
Under-voltage lockout and protection against over-current and over-temperature
Reverse-voltage protection circuit
Current limiting can be enabled by adding sense resistors (not included)

Technical documents / Downloads

BedienungsanleitungManualDownload

Write the first review for this item and help others make a purchase decision!

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/