Pololu BD65496MUV Single Brushed DC Motor Driver Carrier

Pololu BD65496MUV Single Brushed DC Motor Driver Carrier

(1 Reviews)

16,95 € (Net 14,24 € )

Top rated

incl. 19% VAT , plus (S)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately
Delivery time: 6 - 8 Workdays (DE - int. shipments may differ)

SKU: PO2960
GTIN: 4060137017155
Category: Driver
Manufacturers: Pololu
MPN: 2960
Storage Tiers: Maintain

This compact breakout board for ROHM’s BD65496MUV motor driver offers an operating voltage range of 2 V to 16 V and can deliver a continuous 1.2 A (5 A peak for a few milliseconds) to a single brushed DC motor. The motor driver features variable switching speed, allowing for PWM frequencies up to 500 kHz, two drive mode options, and built-in under-voltage and over-temperature protection; our carrier also adds reverse-voltage protection.

The BD65496MUV from ROHM is a tiny H-bridge motor driver IC that can be used for bidirectional control of one brushed DC motor at 2 V to 16 V. It can supply up to about 1.2 A continuously and can tolerate peak currents up to 5 A for a few milliseconds. The BD65496MUV is a great IC, but its small surface-mount package makes it difficult for the typical student or hobbyist to use; our breakout board makes it easy to use with standard solderless breadboards and 0.1' perfboards. Since this board is a carrier for the BD65496MUV, we recommend careful reading of the BD65496MUV datasheet (481k pdf). The board ships populated with SMD components, including the BD65496MUV and a reverse battery protection circuit.

Features

Single-channel H-bridge motor driver with shoot-through protection and internal free-wheeling diodes (can drive one DC motor)
Motor supply voltage: 2 V to 16 V
Logic supply voltage: 2.5 V to 5.5 V
Output current: up to 1.2 A continuous (5 A peak for a few milliseconds)
Two possible interface modes: IN/IN or EN/IN (one pin for speed and another for direction)
Configurable switching speed allows for PWM frequencies up to 500 kHz
Under-voltage lockout on the logic supply and protection against over-temperature
Carrier board adds reverse-voltage protection on the motor supply
Compact size (0.6' x0.6')

Included hardware

Two 1x6-pin breakaway 0.1' male headers are included with the BD65496MUV motor driver carrier, which can be soldered in to use the driver with breadboards, perfboards, or 0.1' female connectors. (The headers might ship as a single 1x12 piece that can be broken in half.) The right picture above shows the two possible board orientations when used with these header pins (parts visible or silkscreen visible). You can also solder your motor leads and other connections directly to the board.

General specifications

Motor driver: BD65496MUV
Motor channels: 1
Minimum operating voltage: 2 V
Maximum operating voltage: 16 V
Continuous output current per channel: 1.2 A
Peak output current per channel: 5 A. For no longer than 10 ms; duty cycle < 5%.
Maximum PWM frequency: 500 kHz. TR1 and TR2 low.
Minimum logic voltage: 2.5 V
Maximum logic voltage: 5.5 V
Reverse voltage protection?: Y