Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137086403 |
HAN: | 3418 |
Category: | Distance/ToF Sensor |
Storage Tiers: | Maintain |
Shipping weight: | 0,01 kg |
Item weight: | 0,01 kg |
Dimensions ( Length × Width × Height ): | 1,80 × 1,30 × 0,20 cm |
This sensor is a carrier/breakout board for ST’s VL53L7CX laser-ranging sensor, which offers fast and accurate ranging up to 3.5 m through a digital I2C interface. It has an extra-wide 60°x60° square field of view (FOV) (90° diagonal), and it can measure absolute distances to multiple targets simultaneously across multiple zones, providing enough data for a depth map with up to 8x8 resolution. The board includes a 3.3 V linear regulator and level-shifters that allow it to work over an input voltage range of 2.5 V to 5.5 V, and the 0.1? pin spacing makes it easy to use with standard solderless breadboards and 0.1? perfboards. Note: This is not recommended for use with 8-bit MCUs; for such applications, consider the VL53L1X, VL53L0X carrier, or VL6180X carrier.
- Dimensions: 13 mm x 18 mm x 2 mm
- Weight without header pins: 0.5 g
- Operating voltage: 2.5 V to 5.5 V
- Supply current: ~100 mA (typical average during active ranging with default settings)
- Peak current can reach 150 mA
- Maximum range: 3.5 m (11 ft)
- Resolution: 1 mm depth, 4x4 or 8x8 sensor zones
- Minimum range: 20 mm (0.8 in)
- Emitter: 940 nm invisible Class 1 VCSEL (vertical cavity surface-emitting laser) – eye-safe
- Detector: SPAD (single photon avalanche diode) receiving array
- Typical full field of view (FoV): 90° diagonal (60° horizontal/vertical)
- Output format (I2C): histogram
Included components
A 1x8 strip of 0.1? header pins and a 1x7 strip of 0.1? right-angle header pins are included, as shown in the picture below. You can solder the header strip of your choice to the board for use with custom cables or solderless breadboards, or you can solder wires directly to the board itself for more compact installations.
The board has two mounting holes spaced 0.5? apart that work with #2 and M2 screws (not included).
General specifications
- Resolution: 1 mm
- Maximum range: 350 cm. Effective range depends on configuration, target, and environment.
- Minimum range: 2 cm
- Interface: I2C
- Minimum operating voltage: 2.5 V
- Maximum operating voltage: 5.5 V
- Supply current: 100 mA. Typical average during active ranging with default settings; peak current can reach 150 mA.
Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de