Produktinformationen
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137033360 |
HAN: | 3132 |
Kategorie: | Tic Stepper Motor Controllers |
Versandgewicht: | 0,01 kg |
Artikelgewicht: | 0,01 kg |
Abmessungen ( Länge × Breite × Höhe ): | 3,80 × 2,60 × 1,30 cm |
Produktbeschreibung
Overview
The Tic family of stepper motor controllers makes it easy to add basic control of a bipolar stepper motor to a variety of projects. These versatile, general-purpose modules support six different control interfaces–USB for direct connection to a computer, TTL serial and I²C for use with a microcontroller, RC hobby servo pulses for use in an RC system, analog voltages for use with a potentiometer or analog joystick, and quadrature encoder for use with a rotary encoder dial–and offer many settings that can be configured using our free configuration utility (for Windows, Linux, and macOS). This software simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB (a micro-B USB cable is required to connect the Tic to a computer).
The Tic family currently has two members: the Tic T825, which operates from 8.5 V to 45 V, and the Tic T834, which operates from 2.5 V to 10.8 V. Both can deliver up to 1.5 A continuous per phase without a heat sink or forced air flow.
Features and specifications
- Open-loop speed or position control of one bipolar stepper motor
- A variety of control interfaces:
- USB for direct connection to a computer
- TTL serial operating at 5 V for use with a microcontroller
- I²C for use with a microcontroller
- RC hobby servo pulses for use in an RC system
- Analog voltage for use with a potentiometer or analog joystick
- Quadrature encoder input for use with a rotary encoder dial, allowing full rotation without limits (not for position feedback)
- STEP/DIR inputs for compatibility with existing stepper motor control firmware
- Acceleration and deceleration limiting
- Maximum stepper speed: 50,000 steps per second
- Very slow speeds down to 1 step every 200 seconds (or 1 step every 1428 seconds with reduced resolution).
- Six different microstep resolutions: full step, half step, 1/4 step, 1/8 step, 1/16 step, and 1/32 step
- Digitally adjustable current limit
- Optional safety controls to avoid unexpectedly powering the motor
- Input calibration (learning) and adjustable scaling degree for analog and RC signals
- 5 V regulator (no external logic voltage supply needed)
- Optional kill switch inputs
- Connects to a computer through USB via a USB A to Micro-B cable(not included)
- Free configuration software available for Windows, Linux, and macOS
Dimensions
Size: | 38mm × 27mm × 10,7mm |
---|---|
Weight: | 5.1 g |
General specifications
Model: | Tic T834 |
---|---|
Motor driver: | DRV8834 |
Control interface: | USB; non-inverted TTL serial; I²C; RC servo pulses; analog voltage; quadrature encoder |
Minimum operating voltage: | 2.5 V |
Maximum operating voltage: | 10.8 V |
Continuous current per phase: | 1.5 A |
Maximum current per phase: | 2 A |
Maximum step rate: | 50000 PPS |
Microstep resolutions: | full, 1/2, 1/4, 1/8, 1/16, and 1/32 |
Reverse voltage protection?: | Y |
Header pins soldered: | Y |
File downloads
- Tic Software and Drivers for Windows
- Tic Software for Linux (x86)
- Tic Software for Linux (Raspberry Pi)
- Dimension diagram of the Tic T825 USB Multi-Interface Stepper Motor Controller
- Dimension diagram of theTic T834 USB Multi-Interface Stepper Motor Controller
- Texas Instruments DRV8825 stepper motor driver datasheet
- Texas Instruments DRV8834 stepper motor driver datasheet
- 3D model of the Tic T825 USB Multi-Interface Stepper Motor Controller
- 3D model of the Tic T834 USB Multi-Interface Stepper Motor Controller
-
Drill guide for the Tic T825 USB Multi-Interface Stepper Motor Controller
- Drill guide for the Tic T834 USB Multi-Interface Stepper Motor Controller
- UM10204 I²C-bus specification and user manual
- Drill guide for the Tic T834 USB Multi-Interface Stepper Motor Controller
Recommended links
Tic Stepper Motor Controller software source codePackagelist
1x Tic T834 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufentscheidung
Hersteller gemäß GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Verantwortliche Person gemäß GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de