Pololu Simple Motor Controller 18v7 (Fully Assembled)

+ 4

show

Pololu

Pololu Simple Motor Controller 18v7 (Fully Assembled)

Name: Pololu Simple Motor Controller 18v7 (Fully Assembled)
Brand: Pololu
SKU: PO1372
Price: 175.49 EUR
Availability: InStock

SKU: PO1372

175,49 €

per pack

incl. 19% VAT plus

Net: 147,47 €

Choose tax zone / country of delivery

From

Unit price / pack

175,49 € (Net: 147,47 €)

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: ca. 3 weeks (DE - int. shipments may differ)

Product Information

Product safety information

Manufacturer information:

Pololu Corporation
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137018954
HAN:	1372
Category:	DC Motor Driver
Storage Tiers:	Maintain
Shipping weight:	0,02 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	5,30 × 2,80 × 1,30 cm

Product Description

The Pololu Simple Motor Controller 18v7 makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). This version operates from 5.5 to 30 V and is efficient enough to deliver a continuous 7 A (>30 A peak) without a heat sink. It ships with the power capacitor and connectors installed as shown.

The Pololu Simple Motor Controllers (or SMC, for short) are versatile, general-purpose motor controllers for brushed, DC motors. A wide operating range of up to 5.5–40V and the ability to deliver up to several hundred Watts in a small form factor make these controllers suitable for many motor control applications. With a variety of supported interfaces—USB for direct connection to a computer, TTL serial for use with embedded systems, RC hobby servo pulses for use as an RC-controlled electronic speed control (ESC), and analog voltages for use with a potentiometer or analog joystick—and a wide array of configurable settings, these motor controllers make it easy to add basic control of brushed DC motors to a variety of projects. Although this motor controller has many more features than competing products, a free configuration utility (for Windows and Linux) simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB.

Simple bidirectional control of one DC brush motor.
5.5 V to 30 V (18v7, 18v15, and 18v25) or 40 V (24v12 and 24v23) operating supply range.
7 A to 25 A maximum continuous current output without a heat sink, depending on controller model
Four communication or control options:
1. USB interface for direct connection to a PC.
2. Logic-level (TTL) serial interface for direct connection to microcontrollers or other embedded controllers.
3. Hobby radio control (RC) pulse width interface for direct connection to an RC receiver or RC servo controller.
4. 0–3.3 V analog voltage interface for direct connection to potentiometers and analog joysticks.
Simple configuration and calibration over USB with free configuration program for Windows.

If you need to identify which version you have, you can just plug it into a computer through USB and the SMC software will tell you. For quick visual identification without a computer, you can distinguish this version from the identically sized SMC G2 18v15 by the number 100 on top of the tall silver electrolytic capacitors.

Dimensions

Size: 2.1″ × 1.1″ × 0.5″
Weight: 14 g

General specifications

Motor channels: 1
Control interface:
- USB
- non-inverted TTL serial
- I2C
- RC servo pulses
- analog voltage. Autodetects baud rates between 1200 and 500,000 bps, or can be set to any fixed baud rate in this range.
Minimum operating voltage: 5.5 V
Maximum operating voltage: 30 V
Continuous output current per channel: 7 A. Typical results at room temperature without a heat sink.
Maximum PWM frequency: 21.77 kHz
Maximum logic voltage: 3.3 V. All digital inputs are 5V tolerant.
Reverse voltage protection?: N

Write the first review for this item and help others make a purchase decision!

Bedienungsanleitung

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de

Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Pololu Simple Motor Controller 18v7 (Fully Assembled)

Dimensions and Weight

Bedienungsanleitung

Pololu Simple Motor Controller 18v7 (Fully Assembled)

Service package

Services for business customers