The Simple Motor Controllers are versatile, general-purpose single-channel motor controllers for brushed, DC motors. Wide operating voltage ranges and the ability to deliver up to several hundred watts in a small form factor make these controllers suitable for many motor control applications. With a variety of supported interfaces—USB for direct connection to a computer, TTL serial and I²C for use with embedded systems, RC hobby servo pulses for use as an RC-controlled electronic speed control (ESC), and analog voltages for use with a potentiometer or analog joystick—and a wide array of configurable settings, these motor controllers make it easy to add basic control of brushed DC motors to a variety of projects. A free configuration utility for Windows simplifies initial setup of the device and allows for in-system testing and monitoring of the controller via USB.
|Control interface:||USB; non-inverted TTL serial; I²C;
RC servo pulses; analog voltage1
|Minimum operating voltage:||6.5 V|
|Maximum operating voltage:||40 V2|
|Continuous output current per channel:||12 A3|
|Maximum PWM frequency:||22.5 kHz|
|Maximum logic voltage:||3.3 V4|
|Reverse voltage protection?:||Y|
|Version:||G2 24v12 (40 V max, 12 A max continuous)|
- Autodetects baud rates between 1200 and 500,000 bps, or can be set to any fixed baud rate in this range.
- Absolute maximum; higher voltages can permanently destroy the motor driver. Recommended maximum is approximately 34 V, which leaves a safety margin for ripple voltage on the supply line.
- Typical results at room temperature running at 90% duty cycle.
- All digital inputs are 5V tolerant.
|Size:||2.1″ × 1.1″ × 0.42″|
Schauen Sie sich bitte den Reiter 'Dokumente' für weitere Informationen an.
1xHigh-Power Simple Motor Controller G2 24v12