This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible board. Its two integrated MAX14870 motor drivers allows it to operate from 4.5 V to 36 V, making it a great for higher-voltage motors and applications, and the shield can 1.7 A continuous (2.5 A peak) per motor. The shield can optionally be configured to power the Arduino from the same power supply as the motor driver, and the Arduino pin mappings can be customized (by cutting traces) if the defaults are not convenient.
Two single-channel H-bridge motor drivers with shoot-through protection and internal free-wheeling diodes (can each drive one DC motor)
Motor supply voltage: 4.5 V to 36 V
Output current: 1.7 A continuous (2.5 A peak) per motor
PWM operation up to 50 kHz (ultrasonic frequencies allow for quieter motor operation)
Simple two-pin DIR/PWM interface (one pin controls direction and another controls speed)
Shield can optionally power the Arduino base directly when motor supply voltage is suitable
Shield has convenient location for adding a 3-pin voltage regulator to power the Arduino base in applications where the motor supply voltage is not suitable for powering the Arduino directly
Arduino library makes it easy to get started using this board as a motor driver shield
Arduino pin mappings can be customized (by cutting traces) if the default mappings are not convenient
Reverse-voltage protection on motor power supply
Under-voltage lockout
Active-low fault output indicates over-current or over-temperature condition
Surface-mount resistors can optionally be added to enable automatic current limiting
Dimensions (Without included hardware)
Size: 2.0″ × 0.96″
Weight: 4.8 g
General specifications
Motor driver: MAX14870 (x2)
Motor channels: 2
Minimum operating voltage: 4.5 V
Maximum operating voltage: 36 V
Continuous output current per channel: 1.7 A. Typical results at room temperature with VIN=18 V and both channels running at 90% duty cycle.
Manufacturer according to GPSR Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
By selecting "Accept all", you give us permission to use the following services on our website: Strictly necessary cookies, YouTube, Vimeo, Google Map, PayPal Express Checkout und Ratenzahlung, Google Kundenrezensionen, GoAffPro Affiliate Tracking, Eckstein Suchstatistik, Google Analytics 4, Google Ads Conversion Tracking. You can change the settings at any time (fingerprint icon in the bottom left corner). For further details, please see Individual configuration and our Privacy notice.
The settings you specify here are stored in the "local storage" of your device. The settings will be remembered for the next time you visit our online shop. You can change these settings at any time (fingerprint icon in the bottom left corner).
For more information on cookie lifetime and required essential cookies, please see the Privacy notice.
Would you like to see these contents? Activate the desired contents for one session only or allow the website to remember these settings. Once you have given your consent, the third-party data can be loaded. For this, third-party cookies might be stored on your device. You can change these settings at any time (fingerprint icon in the bottom left corner). For further details, please see the Privacy notice.