Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137051555 |
HAN: | 3799 |
Category: | Step-Down |
Regulator-Function: | Step-Down |
Output-Type: | adjustable |
Operating Voltage max.: | 50V |
Operating Voltage min.: | 4V |
Quiescent Current max.: | 2mA |
Output Voltage max.: | 25V |
Output Voltage min.: | 4V |
Output Current max.: | 600mA |
Storage Tiers: | Maintain |
Shipping weight: | 0,01 kg |
Item weight: | 0,01 kg |
Dimensions ( Length × Width × Height ): | 1,10 × 1,60 × 0,40 cm |
Overview
The D36V6x family of buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 50 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters), which makes them much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large. This family includes seven versions with fixed output voltages ranging from 3.3 V to 15 V and two adjustable versions that can be set using a trimmer potentiometer
The regulators feature short-circuit/over-current protection, and thermal shutdown helps prevent damage from overheating. The boards do not have reverse-voltage protection.
Features
- Input voltage: 4 V to 50 V (input must exceed the output by the dropout voltage; see the dropout voltage section for details)
- Output voltage: adjustable from 4 V to 25 V by on-board trimmer potentiometer
- Maximum output current: 600 mA (see the maximum continuous output current graph below)
- Fixed 2.1 MHz switching frequency
- High-voltage enable input can put the board into a low-power state where it draws less than 2 ?A (typical)
- Low quiescent current: < 2 mA (see the quiescent current graph below)
- Over-current and short-circuit protection, over-temperature shutoff
- Small size: 0.6? × 0.4? × 0.15? (15 mm × 10 mm × 4 mm)
- Weight: 0.6 g
General specifications
- Minimum operating voltage:4 V2
- Maximum operating voltage:50 V
- Maximum output current:600 mA
- Minimum output voltage:4 V3
- Maximum output voltage:25 V3
- Reverse voltage protection?:N
- Maximum quiescent current:2 mA4
- Output type:adjustable 4-25V3
Identifying markings
- PCB dev codes:reg04a
- Other PCB markings:0J3866
Notes:
- 1.Without included optional headers.
- 2.The input voltage must exceed the output voltage by the dropout voltage.
- 3.Output voltage is set by a built-in trimmer potentiometer.
- 4.While enabled with no load. Can be reduced to under 2 ?A using the enable pin.
Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de