Description:
XL6009 chip module uses high quality, high efficiency (up to 94%), low heat. It can work without cooler in 15W, or with cooler in 20w.
Technical details:
- Dimensions (L x W x H): Ca. 43 x 21 x 14mm (with potentiometer)
- Input voltage: 3V - 32V
- Output voltage: 5V - 40V (adjustable)
- Output current: Rated current 2A, 4A max (additional heat sink required)
- Efficiency: Up to 94%
- Potentiometer Setting range: clockwise (increase), counterclockwise (decrease)
- Switching frequency: 400kHz
- Rectifier: Non-synchronous rectification
- Module characteristics: Non-isolated buck module
- Operating temperature: -40 to 85 degrees Celsius (output power 10W or less)
- Full Load Temperature rise: 40 degrees Celsius
- Load change: ±0.5%
- Voltage regulation: ±0.5%
- >Dynamic Resonance Speed: 5% 200uS
- Connection Mode: Welded constructions and pin can be soldered directly PCB
Note:
This module is adjustable Shear modulus. To change the output voltage, you can adjust the module above the decreasing blue adjustable resistor. The maximum output voltage is 40V .
Modules via IN - ( minus input ) indicated, IN + (positive input) , OUT - (negative output) , OUT + ( positive output) must be connected correctly, otherwise it may cause damage to the module.
You do not exceed the rated output power of the module, for example the module ( 20W ) cannot be used to supply laptop ( 90W ). This module has no output short-circuit protection.
Scope supplied:
- 1xXl6009 Step-up voltage regulator adjustable
Datasheet
Shenzhen Harztec Technology Co., 309, 3F, Block B, Ganfeng Technology Building 1, No.993 Jiaxian Road, Xiangjiaotang Community, Bantian Street,, 518129 Shenzhen, China, [email protected], https://harztec.com