Product Description
The ESP32-P4-WIFI6-DEV-KIT Development Board combines the ESP32-P4 for processing and peripheral control with an ESP32-C6 for wireless communication. It targets the development of connected human-machine interfaces, local image processing and voice-controlled applications. Hardware image-processing and security functions support camera and audio data processing while protecting programs and keys.
External cameras and displays connect through MIPI interfaces. Ethernet and Wi-Fi provide network connectivity, while USB-C supports power input and programming. GPIO headers allow additional circuits to be connected.
Highlights
- 32-bit RISC-V processors with dual-core and single-core processing
- Separate memory regions for high-performance and low-power operation
- Image processing with JPEG codec, pixel accelerator, image signal processor and H.264 encoder
- 32 MB in-package PSRAM and 16 MB onboard NOR flash
- Peripheral connections for cameras, displays, USB, Ethernet, memory cards and audio
Technical Features
- Chips: ESP32-P4 and ESP32-C6; ESP32-P4 with 32-bit RISC-V dual-core and single-core processors
- RAM and flash: 32 MB PSRAM, 16 MB NOR flash
- Internal memory: 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM, 8 KB TCM
- Wireless: 2.4 GHz Wi-Fi 6 and Bluetooth 5/BLE through ESP32-C6
- Interfaces: two-lane MIPI-CSI and MIPI-DSI, USB 2.0 HS OTG, SDIO 3.0, SPI, I2S, I2C, I3C, UART and TWAI
- Ethernet: RJ45 port rated at 100 Mbit/s
- GPIO: 40-pin header with 28 remaining programmable GPIOs
- Touchscreen: no
- Audio connections: MX1.25 2P for an 8 Ω, 2 W speaker and a 3.5 mm headphone jack
- Security functions: secure boot, flash encryption, cryptographic accelerators and true random number generator
Application Areas
- Develop connected human-machine interfaces using an external MIPI-DSI display.
- Capture OV5647 camera data through MIPI-CSI for local image processing.
- Implement voice interaction using the onboard microphone and a connected speaker.
- Connect additional control and acquisition circuits through the GPIO headers.
Notes
- PoE power requires an external PoE module; the PoE HAT (C) and network switch are not included.
- The RTC battery header supports rechargeable RTC batteries only.
- The USB OTG role is switched between host and device using a jumper.
What's Included
- 1 x ESP32-P4-WIFI6-DEV-KIT
- 1 x Speaker, 8 Ω, 2 W
- 2 x SH1.0 4PIN cable, approximately 150 mm
| Item information | Value |
|---|---|
| GTIN: | 4060137025907 |
| HAN: | 32054 |
| Category: | Development Boards |
| Touchscreen: | nein |
| Controller-IC: | ESP32-P4; ESP32-C6 |
| Manufacturer Part Number: | 32054 |
| Digital Interface Protocols: | MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0, SPI, I2S, I2C, I3C, UART, TWAI |
| Interface Type: | MIPI-CSI, MIPI-DSI, USB, Ethernet, SDIO, SPI, I2S, I2C, I3C, UART, TWAI, GPIO, ADC |
| CPU Architecture: | 32-bit RISC-V |
| microSD Card Slot: | Ja |
| Camera Support: | Ja |
| Display Interface Type: | MIPI-DSI, 2-lane |
| USB Device Support: | Ja |
| USB Host Support: | Ja |
| USB Version: | 2.0 High-Speed OTG |
| CPU Core Count: | 3 |
| Flash Memory: | 16 |
| PSRAM: | 32 |
| GPIO Count: | 28 |
| Wi-Fi Standard: | Wi-Fi 6 |
| Wi-Fi Frequency Bands: | 2.4GHz |
| Bluetooth Version: | 5 / BLE 5 |
| Wireless Protocols: | Wi-Fi 6, Bluetooth 5, BLE 5 |
| Wireless LAN Standard: | Wi-Fi 6 |
| Compatible Camera Sensor: | OV5647 |
| CPU Configuration: | ESP32-P4: dual-core + single-core; ESP32-C6: wireless coprocessor |
| MCU Family: | ESP32 |
| Ethernet Support: | Ja |
| MCU Series: | ESP32-P4 |
| Target MCU Part Number: | ESP32-P4 |
| Debug Interface: | USB-C UART |
| Debug/Programming Interface: | USB-C UART; USB-C USB |
| Shipping weight: | 0,06 kg |
| Item weight: | 0,05 kg |
| Dimensions ( Length × Width × Height ): | 8,50 × 5,65 × 1,70 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/