Product Description
ESP32-P4-ETH Development Board without POE, KIT is a multimedia platform based on the ESP32-P4NRW32X. It is intended for developers building human-machine interfaces, camera-based systems and networked signal processing applications. Image-processing hardware and cryptographic functions support local data processing and protection. Camera, display, audio and GPIO connections provide access to external components. An RJ45 Ethernet port connects the board to a wired network, while USB Type-C provides power and programming access. The GPIO layout also supports connection to some Raspberry Pi Pico HATs.
Highlights
- 32-bit RISC-V processor with two main cores and an additional low-power core.
- Image and voice processing with JPEG codecs, Pixel Processing Accelerator, Image Signal Processor and H.264 encoder.
- 32 MB in-package PSRAM and 32 MB onboard NOR flash.
- Multimedia connectivity with MIPI-CSI, MIPI-DSI, USB 2.0 OTG, Ethernet and an SDIO 3.0 card slot.
- Security functions including Secure Boot, flash encryption, cryptographic accelerators and a true random number generator.
Technical Features
- Processor: ESP32-P4NRW32X with 32-bit RISC-V architecture.
- Memory: 32 MB PSRAM and 32 MB NOR flash.
- Internal memory: 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM and 8 KB TCM.
- Network: RJ45 Ethernet at 100 Mbps.
- Interfaces: 2-lane MIPI-CSI and MIPI-DSI, USB 2.0 OTG High Speed, SPI, I2S, I2C, UART, TWAI and SDIO 3.0.
- GPIO: 40-pin connection layout with 27 remaining programmable GPIOs.
- Camera support: OV5647; display connection for 5, 7, 8 or 10.1 inch DSI screens.
- Audio: onboard microphone and MX1.25 2P speaker connector for an 8 Ω, 2 W speaker.
- Power supply and programming: USB Type-C.
- Variant features: POE no; KIT no.
Application Areas
- Develop human-machine interfaces using an externally connected MIPI-DSI display.
- Capture camera images over MIPI-CSI and process them with the integrated Image Signal Processor.
- Build networked voice interfaces using the microphone and external speaker output.
- Integrate external peripherals into Ethernet systems through GPIO, I2C or SPI.
Notes
- The GPIO layout is compatible with some Raspberry Pi Pico HATs, not all.
- A display, camera and speaker are not included.
What's Included
- 1 x ESP32-P4-ETH
- 2 x 20-pin header
| Item information | Value |
|---|---|
| GTIN: | 4060137026485 |
| HAN: | 32086 |
| Category: | Development Boards |
| Touchscreen: | nein |
| Controller-IC: | ESP32-P4NRW32X |
| Manufacturer Part Number: | 32086 |
| Digital Interface Protocols: | SPI, I2S, I2C, UART, TWAI, SDIO 3.0, MIPI-CSI, MIPI-DSI, USB 2.0 |
| Interface Type: | RJ45 Ethernet, USB Type-C, USB OTG, MIPI-CSI, MIPI-DSI, GPIO, microSD |
| CPU Architecture: | 32-bit RISC-V |
| microSD Card Slot: | Ja |
| Camera Support: | Ja |
| Display Interface Type: | MIPI-DSI (2-lane) |
| USB Device Support: | Ja |
| USB Host Support: | Ja |
| USB Version: | 2otghighspeed |
| CPU Core Count: | 2 |
| Flash Memory: | 32 |
| PSRAM: | 32 |
| GPIO Count: | 27 |
| Connector Type: | RJ45, USB Type-C, MX1.25 2P, 40-pin GPIO, 4-pin USB |
| Compatible Camera Sensor: | OV5647 |
| CPU Configuration: | Dual-core HP RISC-V + single-core LP RISC-V |
| MCU Family: | ESP32-P4 |
| Ethernet Support: | Ja |
| MCU Series: | ESP32-P4 |
| Onboard NAND Flash: | Nein |
| Target MCU Part Number: | ESP32-P4NRW32X |
| Debug/Programming Interface: | USB Type-C |
| Shipping weight: | 0,02 kg |
| Item weight: | 0,02 kg |
| Dimensions ( Length × Width × Height ): | 7,80 × 2,10 × 1,80 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/