Mini Uninterruptible Power Supply module, Supports charging And Power output at the same time, 5V 2.5A Output
- Mini UPS expansion board for easy soldering or integration into mobile robots and industrial control equipments
- I2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real time
- Onboard multiple function pins, provides two charging and discharging methods via pads and pin headers
- Multiple battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, and reverse protection, along with the equalizing charge feature, more safe and stable
- Onboard 5V regulator, up to 2.5A continuous output current
- Onboard warning indicators, easy to check if the battery is connected correctly and charging status
Specifications
- Output voltage: 5V 2.5A
- Charger Support: 5V 3A
- Control bus: I2C
- Battery support: 10440 Lithium battery × 3 (in parallel, NOT included)
- Dimensions: 61 × 38mm
Uninterruptible Power
It is able to charge the batteries and provide power output at the same time from external power supplyAutomatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble
* for reference only, the CM4, CM4 base board, TF card and 10440 batteries are NOT included
Real time monitoring
monitoring the batteries voltage, current, power, and remaining capacity via I2C interface
Safe and stable circuit design
Protection circuits for over charge/discharge, over current, short circuit, and reversealong with the equalizing charge feature, more safe and stable
What's On Board
-
ETA1188 5V voltage regulator
-
ETA6953 Battery charge/discharge chip
-
INA219 Voltage/current monitoring chip
-
S8261 Battery protection chip
-
RT9193 3.3V voltage regulator
-
AO4402 Battery protection MOS tube
-
UPS ON/OFF switch Control UPS output
-
Boot button Batteries activation
-
Power indicator Lights up when the UPS switch is turned on
-
Charge indicator Light up: when batteries are chargingBlinking: when batteries are abnormal or no battery connectedLight off: when charging completed or not charging
-
Reverse warning indicators will light up if the related battery is reversely connected
-
Charging pad 5V 3A
-
UPS output pad 5V 2.5A
- Multi-functional pin headers
Pinout definition
-
IN Power input (5V 3A)
-
OUT UPS output (5V 2.5A)
-
GND ground
-
UPS OFF turn off UPS power output when connected to PWR pin
-
BOOT Batteries activation (pull low for 500ms and then pull high)
-
CHARGE Charge indication (low level indicates charging)
-
SCL I2C clock
-
SDA I2C data
-
PWR UPS ON/OFF (turn off UPS power output when connected to UPS OFF pin)
Note: When using pin headers for charging and discharging, it is recommended to connect all input and output pins for 2.5A output current to reduce pin stress
WIKI: www.waveshare.com/wiki/UPS_Module_Mini
SAFETY CAUTIONS
- Li-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.
- Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.
- Do not mix use old batteries with new ones, avoid using batteries of different brands.
- When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.
- Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.
- Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.
Lieferumfang
