World Trade Plaza south side, Fuhong Rd, Futian District
Shenzhen, China, 518000
[email protected]
https://waveshare.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
The LC76G GPS Module is a Multi-GNSS (Global Navigation Satellite System) module, supports GPS, BeiDou (BDS), GLONASS, Galileo and QZSS systems, allows multi-system combined or single-system independent positioning. Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function, provides a good positioning experience of fast, accurate, high-performance.
- Supports Multi-GNSS systems: GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS
- Supports UART and I2C communication
- Built-in Low-Noise Amplifier (LNA) for improved reception sensitivity
- Supports EPO™ (Extended Predictive Orbit) and EASY™ (Embedded Assist System) function
- Supports 1PPS
- UART communication baudrate: 9600~921600bps (115200bps by default)
- Onboard rechargeable Li battery MS621FE, for preserving ephemeris information and hot starts
- 2x LEDs for indicating the module working status
Parameters
- Product: LC76G(AB)
- GNSS: GPS/GLONASS/Galileo/BDS/QZSS
- Chip Platform: AG3352
- L1 Band
- Receiver Channels 47 Tracking ch
- SBAS Support
- A-GNSS: Support
- Sensitivity
- Acquisition: -147dBm
- Re-acquisition: -159dBm
- Tracking: -166dBm
- TTFF (Time to first fix)
- Cold starts
- 26s, Autonomous
- 12s, With EASY™
- 5s, With EPO™
- Warm starts
- 20s, Autonomous
- 2s, with EASY™
- Hot starts: 1s
- Cold starts
- Position accuracy: 1.5m CEP
- Speed accuracy: 0.1m/s
- Acceleration accuracy(Max): 0.1m/s²
- Timing accuracy: 30ns
- Update Rate (Max): 10Hz
- I2C rate: 400Kbps (Max)
- UART baudrate
- Range: 9600~921600bps
- Default: 115200bps
- GNSS data update rate
- Max: 10Hz
- Default: 1Hz
Compatible With Multiple Platforms
- Raspberry Pi/Raspberry Pi Pico/Jetson Nano/ESP32/Arduino
Pinout definition
- VCC Power supply (3.3V/5V)
- GND Gound
- TX Connect to MCU.RX (Signal direction: TX >> MCU.RX)
- RX Connect to MCU.TX (Signal direction: MCU.TX >> RX)
- PPS GPS status indicator
- RST Reset Pin
- SDA I2C data pin
- SCL I2C clock pin
WIKI: www.waveshare.com/wiki/LC76G_GNSS_Module
Lieferumfang
This product is suitable for outdoor positioning (comes with active GPS ceramic antenna by default), if you need to position indoor, it is recommended to purchase: WS8781 - GPS external antenna (with IPX to SMA Adapter) (antenna is placed to the window area, the module is within 3.5m from the antenna).
- LC76G GNSS Module x1
- GH1.25 8PIN cable x1
Wiki
Manufacturer according to GPSR
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de