Product Description
ESP32-S3-Touch-LCD-1.28 is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.28inch capacitive touch display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly.
- Equipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE), with onboard antenna
- Built in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory
- Type-C connector, keeps it up to date, easier to use
- Onboard 1.28inch capacitive touch display, 240x240 resolution, 65K color
- Onboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture
- Onboard 3.7V lithium battery recharge/discharge header and 6 x GPIO pins via SH1.0 connector
- Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
- Integrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions
What's On Board
-
ESP32-S3R2: The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 2MB PSRAM
-
W25Q128JVSIQ: 16MB NOR-Flash
-
CH343P: USB to UART chip
-
ME6217C33M5G: 800mA output, low dropout, high rejection rate
-
ETA6096: high-efficiency Lithium battery recharge manager
-
QMI8658: 6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer.
-
MX1.25 battery header: MX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging
-
USB Type-C connector: supports USB1.1 hosts and slave devices
- RESET button
-
BOOT button: Press it before resetting to enter download mode
Wiki:www.waveshare.com/wiki/ESP32-S3-Touch-LCD-1.28
Lieferumfang
- ESP32-S3-Touch-LCD-1.28 x1
- SH1.0 12PIN cable x1
