Product Description
The ESP32-P4-ETH Development Board with POE, without KIT is based on the ESP32-P4NRW32X and supports the development of networked user interfaces, image processing and voice applications. It is intended for developers integrating cameras, displays and Ethernet communication into embedded systems. Hardware image-processing and cryptographic functions support local processing and protected operations.
External displays and cameras connect through MIPI-DSI and MIPI-CSI respectively. A 40-pin GPIO header and peripheral interfaces provide expansion connections. Power is supplied through USB Type-C or over Ethernet using the included PoE module.
Highlights
- 32-bit RISC-V processors with two high-performance cores and one low-power core.
- Internal memory with separate high-performance and low-power memory regions.
- Image and voice processing with JPEG codecs, PPA, ISP and an H.264 encoder.
- 32 MB in-package PSRAM and 32 MB onboard NOR Flash.
- Multimedia interfaces including MIPI-CSI, MIPI-DSI, USB OTG and Ethernet.
Technical Features
- Processor: ESP32-P4NRW32X, 32-bit RISC-V with two high-performance cores and one low-power core.
- Memory: 32 MB PSRAM and 32 MB NOR Flash.
- Internal memory: 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM and 8 KB TCM.
- Ethernet: RJ45 port with 100 Mbps throughput.
- Display connection: 2-lane MIPI-DSI for 5, 7, 8 and 10.1-inch DSI displays.
- Camera connection: 2-lane MIPI-CSI, supporting OV5647.
- Interfaces: USB 2.0 High Speed with OTG, SPI, I2S, I2C, UART, TWAI and SDIO 3.0 at the microSD slot.
- Expansion: 2 × 20-pin GPIO header, 27 remaining programmable GPIOs.
- Power supply: USB Type-C or PoE.
- Audio: onboard microphone; MX1.25-2P speaker connector for 8 Ω, 2 W speakers.
- Variant: POE yes; KIT no.
Application Areas
- Develop networked user interfaces with an external MIPI-DSI display.
- Capture camera images through MIPI-CSI and process them using the ISP and H.264 encoder.
- Implement voice interaction using the onboard microphone and an external speaker.
- Expand Ethernet-connected input/output nodes through GPIO and serial interfaces.
Notes
- A DSI display, camera, speaker and Ethernet switch are not included.
- The 40-pin header is compatible with some Raspberry Pi Pico HATs.
What's Included
- 1 × ESP32-P4-ETH-M
- 1 × PoE module
- 1 × Screws pack
| Item information | Value |
|---|---|
| GTIN: | 4060137026355 |
| HAN: | 32088 |
| Category: | Development Boards |
| Touchscreen: | nein |
| Controller-IC: | ESP32-P4NRW32X |
| Manufacturer Part Number: | 32088 |
| Digital Interface Protocols: | SPI, I2S, I2C, UART, TWAI, SDIO 3.0, MIPI-CSI, MIPI-DSI, USB 2.0, Ethernet |
| Interface Type: | Ethernet, USB, MIPI-CSI, MIPI-DSI, SPI, I2S, I2C, UART, TWAI, SDIO, GPIO |
| CPU Architecture: | 32-bit RISC-V |
| microSD Card Slot: | Ja |
| Camera Support: | Ja |
| Display Interface Type: | MIPI-DSI, 2-lane |
| USB Device Support: | Ja |
| USB Host Support: | Ja |
| USB Version: | USB 2.0 High Speed OTG |
| CPU Core Count: | 3 |
| Flash Memory: | 32 |
| PSRAM: | 32 |
| GPIO Count: | 27 |
| Compatible Camera Sensor: | OV5647 |
| CPU Configuration: | 2 HP cores + 1 LP core |
| MCU Family: | ESP32 |
| Ethernet Support: | Ja |
| MCU Series: | ESP32-P4 |
| Target MCU Part Number: | ESP32-P4NRW32X |
| Shipping weight: | 0,04 kg |
| Item weight: | 0,03 kg |
| Dimensions ( Length × Width × Height ): | 7,80 × 2,10 × 1,80 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/