World Trade Plaza south side, Fuhong Rd, Futian District
Shenzhen, China, 518000
[email protected]
https://waveshare.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137073052 |
HAN: | 20655 |
Category: | USB/RS/CAN/LAN |
Storage Tiers: | Tier3 |
Shipping weight: | 0,01 kg |
Item weight: | 0,01 kg |
Dimensions ( Length × Width × Height ): | 5,70 × 2,20 × 2,50 cm |
The 2-CH UART TO ETH provides an easy way to communicate between UART TTL and RJ45 Ethernet, allowing bi-directional transparent data transmission. It is easy to use, along with features like fast data rate, low power consumption, high stability, suits applications such as safety & security, IoT, and so on.
- Embedded Ethernet MAC and PHY layers
- Bi-direction transparent data transmission between UART and Ethernet
- 10/100M, full-duplex/half-duplex auto-negotiation Ethernet interface, 802.3-compliant
- Auto-MDI/MDIX, detect and switch cable type automatically
- Supports DHCP auto-obtained IP and DNS domain access
- Network parameter configuration like chip operating mode, port, IP, via host computer software or UART command
- Four operating modes: TCP CLIENT, TCP SERVER, UDP CLIENT, UDP SERVER
- 2-CH UART concurrent operation, standalone transparent transmission for each channel
- Full-duplex or half-duplex UART communication, supports RS485 RX/TX auto switch
- Supports virtual serial port software (provided)
- KEEPALIVE mechanism support
- Comes with development resources and manual (examples for Pico/Raspberry Pi/Arduino/STM32)
Specifications
- Operating voltage: 3.3V/5V
- Operating current: 140mA
- Operating mode: TCP/UDP
- UART baudrate: 300bps ~ 921.6Kbps
- UART TTL level: 3.3V / 5V compatible
- Storage temperature: -55? ~ 125?
- Operating temperature: -40? ~ 85?
- Dimensions: 53.00 x 22.00mm
What's On Board
- UART 1 connection status indicator
- UART 2 connection status indicator
- Power indicator
- CH9121 control pins
- CH9121 driver
- AMS1117-3.3V power supply IC
- RT9193-18GB power supply IC
- Ethernet port
Pinout definition
- 5V / 3.3V: power positive, use any pin of 5V/3.3V pins for power supply
- GND: ground
- RST1: external reset input, low active
- RESET: restore to factory setting, detected when chip poweron, low active
- TXD1: asynchronous UART 1 data output (enabled by default)
- TXD2: asynchronous UART 2 data output (disabled by default)
- RXD1: asynchronous UART 1 data input (enabled by default)
- RXD2: asynchronous UART 2 data input (disabled by default)
- CFG0: UART config mode, low level to enter configuration, high level to exit configuration
- RUN: Operating status indicating pin
- DIR1: UART 1 RS485 RX/TX switch (connects to external RS485 controller)
- DIR2: UART 2 RS485 RX/TX switch (connects to external RS485 controller)
WIKI: www.waveshare.com/wiki/2-CH_UART_TO_ETH
Lieferumfang
- 2-CH UART TO ETH x1
Wiki
SSCOM - Serial/Net data debugger
Manufacturer according to GPSR
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de