Pololu 5V, 600mA Step-Down Voltage Regulator D36V6F5 Spannungsregler

Pololu 5V, 600mA Step-Down Voltage Regulator D36V6F5 Spannungsregler

Wir haben derzeit keine Schätzung, wann dieses Produkt wieder auf Lager sein wird. Wir können keinen Zeitrahmen für den Versand oder die Verfügbarkeit garantieren. This compact (0.4" × 0.5") switching step-down (or buck) voltage regulator takes input voltages up to 50 V and efficiently reduces them to 5 V while allowing for a maximum output current of 600 mA. It has a very low dropout, so it can be used with input voltages that are within a few hundred millivolts of its output. The pins have a 0.1" spacing, making this board compatible with standard solderless breadboards and perfboards.

24,95 € (Net 20,97 €)

Best sellers

incl. 19% VAT , plus (S)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Orderable, information on delivery time as follows, otherwise please enquire.
Delivery time: 6 - 8 Workdays (Other countries)

SKU: PO3792
GTIN: 4060137051487
Category: Step-Down
Manufacturers: Pololu
MPN: 3792
Storage Tiers: Maintain

Overview

The D36V6x family of buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 50 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters), which makes them much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large.

Features

Input voltage: 5.2 V to 50 V (minimum input subject to dropout voltage considerations; see the dropout voltage section for details)
Output voltage: 5 V with 4% accuracy
Maximum output current: 600 mA (see the maximum continuous output current graph below)
Fixed 2.1 MHz switching frequency
High-voltage enable input can put the board into a low-power state where it draws less than 2 µA (typical)
Low quiescent current: < 0.1 mA (see the quiescent current graph below)
Over-current and short-circuit protection, over-temperature shutoff
Small size: 0.5? × 0.4? × 0.1? (13 mm × 10 mm × 3 mm)
Weight: 0.5 g

Dimensions

Size: 0.4? × 0.5? × 0.1?¹
Weight: 0.5 g¹

General specifications

Minimum operating voltage: 5.2 V²
Maximum operating voltage: 50 V
Maximum output current: 600 mA
Output voltage: 5 V
Reverse voltage protection?: N
Maximum quiescent current: 0.1 mA³
Output type: fixed 5V

Identifying markings

PCB dev codes: reg04b
Other PCB markings: 0J7034

Notes:

1. Without included optional headers.
2. Subject to dropout voltage considerations.
3. While enabled with no load. Can be reduced to under 2 µA using the enable pin.

Storage Tiers:	Maintain
Output Voltage:	5V
Output Current max.:	600mA
Operating Voltage max.:	50V
Operating Voltage min.:	5.2V
Regulator-Function:	Step-Down
Quiescent Current max.:	0.1mA
Output-Type:	fixed
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	1,10 × 1,30 × 0,30 cm