Pololu 7.5V, 600mA Step-Down Voltage Regulator D36V6F7 Spannungsregler

Pololu 7.5V, 600mA Step-Down Voltage Regulator D36V6F7 Spannungsregler

8,95 € (Net 7,52 € )

In stock

incl. 19% VAT , plus (S)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately
Delivery time: 6 - 8 Workdays (DE - int. shipments may differ)

SKU: PO3794
GTIN: 4060137051500
Category: Step-Down
Manufacturers: Pololu
MPN: 3794
Storage Tiers: Maintain

Overview

The D36V6x family of buck (step-down) voltage regulators generates lower output voltages from input voltages as high as 50 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters), which makes them much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large. This family includes seven versions with fixed output voltages ranging from 3.3 V to 15 V and two adjustable versions that can be set using a trimmer potentiometer

The regulators feature short-circuit/over-current protection, and thermal shutdown helps prevent damage from overheating. The boards do not have reverse-voltage protection.

Features

Input voltage: 7.7 V to 50 V (minimum input subject to dropout voltage considerations; see the dropout voltage section for details)
Output voltage: 7.5 V with 4% accuracy
Maximum output current: 600 mA (see the maximum continuous output current graph below)
Fixed 2.1 MHz switching frequency
High-voltage enable input can put the board into a low-power state where it draws less than 2 ?A (typical)
Low quiescent current: < 0.15 mA (see the quiescent current graph below)
Over-current and short-circuit protection, over-temperature shutoff
Small size: 0.5? × 0.4? × 0.1? (13 mm × 10 mm × 3 mm)
Weight: 0.5 g

General specifications

Minimum operating voltage:7.7 V²
Maximum operating voltage:50 V
Maximum output current:600 mA
Output voltage:7.5 V
Reverse voltage protection?:N
Maximum quiescent current:0.15 mA³
Output type:fixed 7.5V

Identifying markings

PCB dev codes:reg04b
Other PCB markings:0J7034

Notes:

1.Without included optional headers.
2.Subject to dropout voltage considerations.
3.While enabled with no load. Can be reduced to under 2 ?A using the enable pin.

Output Voltage:	7.5V
Output Current max.:	600mA
Operating Voltage max.:	50V
Operating Voltage min.:	7.7V
Regulator-Function:	Step-Down
Quiescent Current max.:	0.15mA
Output-Type:	fixed
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	1,10 × 1,30 × 0,30 cm