Pololu 3.3V Step-Up Step-Down Spannungsregler S7V8F3

Pololu 3.3V Step-Up Step-Down Spannungsregler S7V8F3

(3 Reviews)

17,95 € (Net 15,08 €)

Top rated

incl. 19% VAT , plus (S)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Orderable, information on delivery time as follows, otherwise please enquire.
Delivery time: 6 - 8 Workdays (Other countries)

SKU: PO2122
GTIN: 4060137015656
Category: Step-Up/Step-Down
Manufacturers: Pololu
MPN: 2122
Storage Tiers: Tier2

Overview

The Pololu step-up/step-down voltage regulator S7V8F3 is a switching regulator (also called a switched-mode power supply (SMPS) or DC-to-DC converter) that uses a buck-boost topology. It takes an input voltage from 2.7 V to 11.8 V and increases or decreases the voltage to a fixed 3.3 V output with a typical efficiency of over 90%. The input voltage can be higher than, lower than, or equal to the set output voltage, and the voltage is regulated to achieve a steady 3.3 V.

This flexibility in input voltage is especially well-suited for battery-powered applications in which the battery voltage begins above the desired output voltage and drops below the target as the battery discharges. Without the typical restriction on the battery voltage staying above the required voltage throughout its life, new battery packs and form factors can be considered. For example:

A 3-cell battery holder, which might have a 4.5 V output with fresh alkalines or a 3.0 V output with partially discharged NiMH cells, can be used with this regulator to power a 3.3 V circuit.
A single lithium-polymer cell can run a 3.3 V device through its whole discharge cycle.

In typical applications, this regulator can deliver up to 1 A continuous when the input voltage is higher than 3.3 V (stepping down). When the input voltage is lower than 3.3 V (stepping up), the available current decreases as the difference between the voltages increases; please see the graphs at the bottom of this page for a more detailed characterization. The regulator has short-circuit protection, and thermal shutdown prevents damage from overheating; the board does not have reverse-voltage protection.

This regulator is also available with a fixed 5 V output and with a user-adjustable output.

Features

input voltage: 2.7 V to 11.8 V
fixed 3.3 V output with +5/-3% accuracy
typical continuous output current: 500 mA to 1 A across most combinations of input and output voltages (Actual continuous output current depends on input and output voltages. See Typical Efficiency and Output Current section below for details.)
power-saving feature maintains high efficiency at low currents (quiescent current is less than 0.1 mA)
integrated over-temperature and short-circuit protection
small size: 0.45" × 0.65" × 0.1" (11 × 17 × 3 mm)

Storage Tiers:	Tier2
Output Voltage:	3.3V
Output Current max.:	1000mA
Operating Voltage max.:	11.8V
Operating Voltage min.:	2.7V
Regulator-Function:	Step Down/Step Up
Quiescent Current max.:	0.1mA
Output-Type:	fixed
Shipping weight:	0,00 kg
Item weight:	0,00 kg
Dimensions ( Length × Width × Height ):	1,20 × 1,70 × 0,30 cm