Pololu Stepper Motor NEMA 11 Bipolar 200 Steps/Rev 28x45mm 4.5V 0.67A/Phase

Pololu Stepper Motor NEMA 11 Bipolar 200 Steps/Rev 28x45mm 4.5V 0.67A/Phase

42,95 € (Net 36,09 €)

incl. 19% VAT , plus (L)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Orderable, information on delivery time as follows, otherwise please enquire.
Delivery time: 6 - 8 Workdays (Other countries)

SKU: PO1206
GTIN: 4060137018343
Category: Stepper Motors
Manufacturers: Pololu
MPN: 1206
Storage Tiers: Maintain

This small hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 670 mA at 4.5 V, allowing for a holding torque of 950 g-cm (13 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. These leads connect to the stepper motor through a removable JST-ZHR-5 connector.

The motor can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver or one of our Tic Stepper Motor Controllers. In particular, the Tics make control easy because they support six different interfaces (USB, TTL serial, I²C, RC, analog voltages, and quadrature encoder) and are configurable over USB with our free configuration utility.

Size: 28 mm square × 45 mm, not including the shaft (NEMA 11)
Weight: 140 g (5 oz)
Shaft diameter: 5 mm “D”
Steps per revolution: 200
Current rating: 670 mA per coil
Voltage rating: 4.5 V
Resistance: 6.8 Ω per coil
Holding torque: 950 g-cm (13 oz-in)
Inductance: 4.9 mH per coil
Lead length: 30 cm (12″)
Output shaft supported by two ball bearings

General specifications