Product Description
Overview
This power distribution board is designed specifically for the Romi chassis as a convenient way to access the chassis’s battery power and pass that on to the rest of the electronics that make up your robot. The board features reverse voltage protection and the patented latching circuit from the Pololu pushbutton power switch, providing a compact, solid-state power switch for your robot that can be controlled with a momentary pushbutton: one push turns on power and another push turns it off.
The board has a small pushbutton already installed and offers convenient points for connecting external pushbutton or tactile switches in parallel. It also offers several alternate pushbutton connection options that result in push-on-only or push-off-only operation, and additional inputs enable further power control options like allowing your robot to turn off its own power. Alternatively, the board can be reconfigured to disable the pushbutton circuit and give control to the small installed slide switch.
The board’s power buses are accessible through a set of 0.1?-spaced pins that are compatible with standard 0.1? male and 0.1? female headers, and also through a larger set of holes that are compatible with 3.5mm-pitch terminal blocks (you can combine a 2-pin block and a 3-pin block into a single 5-pin block that spans the three power holes and two ground holes).
Two 1/4? #2-56 screws and two #2-56 nuts are included for mounting the board to the Romi chassis.
Dimensions
General specifications
- Current rating:5 A
- Minimum operating voltage:2.5 V
- Maximum operating voltage:10.8 V
Identifying markings
- PCB dev codes:rom01a
- Other PCB markings:0J10031
Notes:
- 1.Board only; no screws or nuts.
