Pololu Addressable RGB 60-LED Strip 5V 1m SK9822

Pololu Addressable RGB 60-LED Strip 5V 1m SK9822

33,95 € (Net 28,53 € )

In stock

incl. 19% VAT , plus (L)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately
Delivery time: 6 - 8 Workdays (DE - int. shipments may differ)

SKU: PO3089
GTIN: 4060137034664
Category: Pushbutton/Other
Manufacturers: Pololu
MPN: 3089
Storage Tiers: Maintain

Description
Reviews

This LED strip has a length of 1 m and contains 60 RGB LEDs that can be individually addressed using an easy-to-control SPI interface, allowing you full control over the color of each RGB LED. The flexible, waterproof strip runs on 5 V and can be chained with additional APA102C strips to form longer runs or cut apart between each LED for shorter sections.

These SK9822-based LED strips work as a drop-in replacement for our older APA102C-based strips in many applications. However, due to slight color differences, we generally do not recommend using the SK9822 and APA102C together in the same project. Also, due to a slight difference in the protocol, you might have to update your code to handle the SK9822. See below for a more detailed comparison of the SK9822 and APA102C.These flexible RGB LED strips based on the SK9822 LED/driver IC are an easy way to add complex lighting effects to a project. Each LED has an integrated driver that allows you to control the color and brightness of each LED. The SK9822 has constant current control, so voltage drops caused by the resistance in long power connections have little effect on the SK9822’s color and brightness as long as the voltage stays above 3.5 V.

In contrast to the SK6812 used in some of our other similar LED strips, which use a specialized one-wire control interface and require strict timing, the SK9822 uses a standard SPI interface for control (with separate data and clock signals) and has no specific timing requirements, making it much easier to control. Another useful feature of the SK9822 is an additional 5-bit brightness control register that allows you to dim your LED strip while still having 24-bit color control. See below for a more detailed comparison of the SK9822 and SK6812.

Specifications

Individually addressable RGB LEDs (30, 60, or 144 LEDs per meter)Features and specifications
24-bit color control
Additional 5-bit brightness control; 32 brightness steps per pixel
SPI control interface
5 V operating voltage
Color and brightness are mostly voltage-independent down to 3.5 V
Each RGB LED draws approximately 50 mA with red, green, and blue at full brightness
12 mm width (30 LEDs/m) or 14 mm width (60 or 144 LEDs/m), 4 mm thickness
Flexible, waterproof silicone rubber sheath (IP65 protection rating)
Includes flexible silicone mounting brackets
Black strip color
Power/data connectors on both strip ends for easy chaining, and the input side includes an additional power and ground wire for alternate power connections
Strips can be cut apart along the lines between each RGB LED segment to separate them into usable shorter sections
Example code available for Arduino