Pololu ACS724 Current Sensor Carrier 0A to 5A 1

Pololu ACS724 Current Sensor Carrier 0A to 5A 2

Pololu ACS724 Current Sensor Carrier 0A to 5A 3

Pololu ACS724 Current Sensor Carrier 0A to 5A 4

Pololu ACS724 Current Sensor Carrier 0A to 5A 5

Pololu ACS724 Current Sensor Carrier 0A to 5A 6

Pololu ACS724 Current Sensor Carrier 0A to 5A 7

+ 2

show

Pololu ACS724 Current Sensor Carrier 0A to 5A

Pololu

Pololu ACS724 Current Sensor Carrier 0A to 5A

Name: Pololu ACS724 Current Sensor Carrier 0A to 5A
Brand: Pololu
SKU: PO4048
Price: 13.23 USD
Availability: InStock

Item No.: PO4048

HAN: 4048

EAN: 4060137086144

HS Code: 9030337000

Herkunftsland: US

Lagerstufe: Maintain

13,23 $

per pcs

incl. 19% VAT plus (S)

Net: 11,12 $

Choose tax zone / country of delivery

Product Description

This board is a simple carrier of Allegro’s unidirectional 5A ACS724LLCTR-05AU Hall effect-based linear current sensor, which offers a low-resistance (~1.2 m?) current path and electrical isolation up to 2.4 kV RMS. This version accepts a unidirectional current input up to 5 A and outputs a proportional analog voltage (800 mV/A) that measures 500 mV when the input current is zero. The typical output error is ±0.9%. It operates from 4.5 V to 5.5 V and is intended for use in 5 V systems.

This current sensor is a carrier board or breakout board for Allegro’s ACS724LLCTR Hall effect-based linear current sensors; we therefore recommend careful reading of the ACS724 datasheet (2MB pdf) before using this product. The following list details some of the sensor’s key features:

Differential Hall sensing rejects common-mode fields, so the orientation of the sensor relative to uniform external magnetic fields (e.g. the Earth’s magnetic field) does not affect the measurement.
The conductive path internal resistance is typically 1.2 m?, and the PCB is made with 2-oz copper, so very little power is lost in the module.
Use of a Hall effect sensor means the IC is able to electrically isolate the current path from the sensor’s electronics (up to 2.4 kV RMS), which allows the sensor to be inserted anywhere along the current path and to be used in applications that require electrical isolation.
High 120 kHz bandwidth for faster response times in control applications.
Optional FILTER pin simplifies bandwidth limiting for better noise reduction and improved resolution at lower frequencies.
Integrated digital temperature compensation circuitry allows for near closed loop accuracy over temperature in an open loop sensor.
Automotive-grade operating temperature range of -40°C to 150°C.

The pads are labeled on the bottom silkscreen, as shown in the picture to the right. The silkscreen also shows the direction that is interpreted as positive current flow via the +i arrow.

This carrier features the ACS724LLCTR-05AU, which operates at 5 V and is designed for unidirectional input current from 0 A to 5 A. When Vcc is 5 V, the output voltage is offset by 500 mV and increases by 800 mV per amp of input current.

This board ships assembled with all surface mount components, and a 3×1 strip of 0.1? header pins is included but not soldered in.

Dimensions

Size: 0.7" x 0.8"
Weight: 1.1 g

General specifications

Current sense: 0.800 V/A. When Vcc is 5 V.
Minimum logic voltage: 4.5 V
Maximum logic voltage: 5.5 V
Supply current: 14 mA. Max. 10 mA typical.
Version: 0 to 5A (unidirectional 5A)
Current sensor: Allegro ACS724LLCTR-05AU

Write the first review for this item and help others make a purchase decision!

Allegro ACS724 current sensor datasheet

Dimension

3D model

Drill guide

Allegro Application Note

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/