Product Information
Product safety information
Manufacturer information:
Pololu Corporation
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/
Responsible person:
Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137042232 |
HAN: | 2870 |
Category: | Step-Up/-Down |
Regulator-Function: | Step Down/Step Up |
Output-Type: | fixed 5V (6V selectable) |
Output Voltage: | 5V |
Operating Voltage max.: | 16V |
Operating Voltage min.: | 2V |
Quiescent Current max.: | 1mA |
Output Current max.: | 1500mA |
Storage Tiers: | Maintain |
Shipping weight: | 0,01 kg |
Item weight: | 0,01 kg |
Dimensions ( Length × Width × Height ): | 1,30 × 1,60 × 0,70 cm |
Product Description
The S9V11F5S6CMA switching step-up/step-down regulator efficiently produces a fixed 5 V (default) or 6 V (selectable) output whether it is higher or lower than the input voltage, which can range from 2 V to 16 V. (Note: minimum start-up voltage is 3 V, but it operates to 2 V after that.) The regulator also has a precision-adjustable low-voltage cutoff with hysteresis that can be used to prevent battery over-discharge. The compact module can supply a typical output current of up to 1.5 A when the input voltage is close to the output voltage.
Features
- Input voltage: 2 V to 16 V (note: this regulator requires 3 V to start, but it can operate down to 2 V after startup)
- Fixed 5 V output with +5/-3% accuracy (can be changed to 6 V using the SEL pin)
- Typical maximum continuous output current: 1.5 A (when input voltage is close to the output; the Typical efficiency and output current section below shows how the achievable continuous output current depends on the input and output voltages)
- Precision-adjustable low-voltage cutoff with hysteresis can be used to protect batteries from over-discharging (quiescent current is approximately 10 µA per volt on VIN when regulator is disabled)
- Power-good indicator can be used to tell when the regulator has reached and is maintaining its target output voltage
- Power-saving feature maintains high efficiency at low currents (quiescent current is less than 1 mA while enabled)
- Integrated over-temperature and short-circuit protection
- Small size: 12.7 × 15.3 × 6.4 mm
- Weight: 0.8 g (Without included optional headers.)
General specifications
- Minimum operating voltage: 2 V
- Maximum operating voltage: 16 V
- Output voltage: 5 V ?Output can be changed to 6 V by driving the SEL pin over 1.1 V.?
- Reverse voltage protection?: N
- Maximum quiescent current: 1 mA ?With no load. Actual quiescent current depends on input voltage; it is typically under 300 µA when the input voltage is close to the output voltage.?
- Low-voltage cutoff: adjustable
Identifying markings
- PCB dev codes: reg20b
- Other PCB markings: 0J10534
Write the first review for this item and help others make a purchase decision!
Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de