Pololu 298:1 Micro Metal Gearmotor HPCB 12V High Power Carbo

Pololu 298:1 Micro Metal Gearmotor HPCB 12V H

Pololu

Pololu 298:1 Micro Metal Gearmotor HPCB 12V High Power Carbon Brush

Name: Pololu 298:1 Micro Metal Gearmotor HPCB 12V High Power Carbon Brush
Brand: Pololu
SKU: PO3045
Price: 35.17 USD
Availability: InStock

Item No.: PO3045

HAN: 3045

EAN: 4060137046889

HS Code: 8501109990

Herkunftsland: US

Lagerstufe: Maintain

35,17 $

per pack

incl. 19% VAT plus (M)

Net: 29,55 $

Choose tax zone / country of delivery

Product Description

This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10 x 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

The HPCB versions (shown on the left in the picture) can be differentiated from versions with precious metal brushes (shown on the right) by their copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

Exact gear ratio: (25x34x37x35x38) / (12x9x10x13x10) ≈ 297.92:1

General specifications

Gear ratio: 297.92:1
No-load speed @ 12V: 110 rpm, Typical ±20%.
No-load current @ 12V: 0.08 A, Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.
This motor will run at 6 V but is intended for operation at 12 V.
Stall current @ 12V: 0.75 A
Stall torque @ 12V: 3.3 kg·cm
Max output power @ 12V: 1.0 W
No-load speed @ 6V: 55 rpm
No-load current @ 6V: 0.04 A
Stall current @ 6V: 0.38 A
Stall torque @ 6V: 1.7 kg·cm
Extended motor shaft?:N
Long-life carbon brushes?:Y
Motor type:0.75A stall @ 12V (HPCB 12V - carbon brush)
Size: 10 x 12 x 26 mm, Output shaft adds 9 mm to the 26 mm length.
Weight: 9.5 g
Shaft diameter: 3 mm, D shaft.

Performance at maximum efficiency

Max efficiency @ 12V: 26 %
Speed at max efficiency: 87 rpm
Torque at max efficiency: 0.73 kg·cm
Current at max efficiency: 0.21 A
Output power at max efficiency: 0.65 W

Dimensions and Weight
Item information	Value
GTIN:	4060137046889
HAN:	3045
Category:	Micro Gearmotor
No-Load Speed (RPM):	110
Form/Type:	High-Power Carbon Brushes (HPCB)
Shaft:	Single
Encoder:	Without
Rated Voltage (V):	12
Gear Ratio:	298:1
Dimension (mm):	10x12 Micro
Stall Torque (kg-cm):	3.3
No-Load Current (A):	0,08
Max Power (W):	1.0
Stall Current (A):	0.75
Shipping weight:	0,02 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	2,60 × 1,20 × 1,00 cm

Write the first review for this item and help others make a purchase decision!

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/