Pololu 12V, 500mA Step-Down Spannungsregler D24V5F12

SKU: PO2846

7,08 €

per pack

incl. 19% VAT plus

Net: 5,95 €

Choose tax zone / country of delivery

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Product Information

Product safety information

Manufacturer information:

Pololu Corporation
Pilot Rd. 920
Nevada
Las Vegas, Vereinigte Staaten, 89119
[email protected]
https://www.pololu.com/

Responsible person:

Eckstein GmbH
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de

Dimensions and Weight
GTIN:	4060137016080
HAN:	2846
Category:	Step-Down
Regulator-Function:	Step-Down
Output-Type:	fixed
Output Voltage:	12V
Operating Voltage max.:	36V
Operating Voltage min.:	12.1V
Quiescent Current max.:	0.2mA
Output Current max.:	500mA
Storage Tiers:	Maintain
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	1,30 × 1,00 × 0,30 cm

Product Description

The compact (13 mm × 10 mm) D24V5F12 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 12 V while allowing for a maximum output current of 500 mA. This regulator offers typical efficiencies between 85% and 93% and has a very low dropout, so it can be used with input voltages as low as a few hundred millivolts above 12 V. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.

Features

Input voltage:
- 3 V to 36 V for output voltages of 1.8 V and 2.5 V
- [output voltage + dropout voltage] to 36 V for output voltages of 3.3 V and higher (see below for more information on dropout voltage)
Fixed 1.8 V, 2.5 V, 3.3 V, 5 V, 6 V, 9 V, 12 V, or 15 V output (depending on regulator version) with 4% accuracy
Maximum output current: 500 mA
Typical efficiency of 80% to 93%
500 kHz switching frequency (when not in power-save mode)
200 μA typical no-load quiescent current
Over-current and short-circuit protection, over-temperature shutoff
Small size: 13 mm × 10 mm × 3 mm
Weight: 0.6 g (Without included optional headers.)

General specifications

Minimum operating voltage: 12.1 V (For small loads; this voltage rises approximately linearly up to 12.9 V at 500 mA output.)
Maximum operating voltage: 36 V
Maximum output current: 500 mA
Output voltage: 12 V
Reverse voltage protection?: N
Maximum quiescent current: 0.2 mA (While enabled (SHDN = HIGH) with no load; while disabled it is proportional to the input voltage (360 μA when the input is 36 V).)

Identifying markings

PCB dev codes: reg16a
Other PCB markings: 0J7990, blank white box

Write the first review for this item and help others make a purchase decision!

Bedienungsanleitung

Manufacturer according to GPSR
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de