Room 1221, Hongyu Building, Longguan Road, Shitouling Community, Longhua Street, Longhua District, Shenzhen
Shenzhen, China, 518109
[email protected]
https://eckstein-shop.de/Keyestudio-Marken
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137071041 |
HAN: | KS0385 |
Category: | Shield for Arduino |
Storage Tiers: | Maintain |
RoHS Certificate: | compliant |
Shipping weight: | 0,02 kg |
Item weight: | 0,02 kg |
Dimensions ( Length × Width × Height ): | 4,13 × 2,40 × 1,19 cm |
This is an expansion board for the ESP-01S WiFi module. After power-on, the module is in BOOT flash mode. The AT command can be directly tested through the serial port on the shield.
To burn the firmware, first press and hold the Flash button on the shield, then click on burning on the software interface, and press the RST button.
When release the Flash button, the module will enter the download mode and start burning the firmware.
Technical Parameters:
- Working voltage: DC 5V
- Working current: minimum 500mA
- Communication voltage: 3.3V
- Environmental attributes: ROHS
- Dimensions: 24mm*41.3mm*11.9mm
- Weight: 3.8g
Datasheet
Manufacturer according to GPSR
Keyestudio, Room 1221, Hongyu Building, Longguan Road, Shitouling Community, Longhua Street, Longhua District, Shenzhen, 518109 Shenzhen, China, [email protected], https://eckstein-shop.de/Keyestudio-Marken
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de