Product Description
Variant: Pico2Go-Kit.
The Pico2Go Mobile Robot is based on the included RP2350-Plus-M control board and provides a platform for developing sensor-controlled movement. Integrated sensors support line following, obstacle avoidance and object tracking. Control is available through a Bluetooth smartphone app or the supplied infrared remote controller. The base board brings sensors and peripherals together without separate sensor wiring. Operation requires two 14500 lithium-ion batteries, which are not included; programming and debugging can continue while the batteries are charging.
Highlights
- Standard header supporting the Raspberry Pi Pico series.
- Battery protection against overcharge, overdischarge, overcurrent, short circuits and reverse polarity.
- Programming and debugging while charging.
- Analog five-channel infrared sensor for line following with PID control.
- Integrated sensors for line following and obstacle avoidance.
Technical Features
- Control board: RP2350-Plus-M included.
- Microcontroller: RP2350A, dual Arm Cortex-M33 or dual Hazard3 RISC-V cores, up to 150 MHz.
- Memory: 520 KB SRAM and 4 MB flash.
- Display: 1.14-inch IPS LCD, 240 × 135 pixels, 65K colors.
- Interfaces: USB 1.1 with device and host support, Bluetooth, infrared, Raspberry Pi Pico header.
- Line detection: five analog infrared channels.
- Drive: N20 micro gearmotors with metal gears.
- Power: 2 × 14500 lithium-ion batteries.
- Distance detection: ultrasonic and infrared.
Application Areas
- Test line-following control using analog infrared sensing and a PID algorithm.
- Develop obstacle avoidance and object tracking with ultrasonic and infrared sensors.
- Control movement, RGB LEDs and the buzzer through a smartphone app.
Notes
- The two required 14500 lithium-ion batteries are not included.
- Use batteries with compatible specifications; do not mix old and new batteries or different brands.
- Observe polarity during charging and discharging and use a suitable charger.
What's Included
- 1 × Pico2Go base board
- 1 × Pico2Go acrylic panel
- 1 × 1.14-inch LCD module
- 1 × Ultrasonic sensor
- 1 × RP2350-Plus-M
- 1 × IR remote controller
- 1 × USB-A to micro-B cable, 1.2 m
- 1 × PH2.0 8-pin cable, 5 cm, opposite-side headers
- 1 × (optional) 5 V 3 A power supply
- 1 × Mini cross wrench sleeve
- 1 × Screwdriver
- 1 × Screws pack
| Item information | Value |
|---|---|
| GTIN: | 4060137313837 |
| HAN: | 31698 |
| Category: | 2WD |
| Manufacturer Part Number: | 31698 |
| Application Interface: | Bluetooth smartphone app; IR remote control |
| Target Platform: | RP2350-Plus; Raspberry Pi Pico series |
| Controller Count: | 1 |
| Interactive Tutorials Included: | Ja |
| Shipping weight: | 0,44 kg |
| Item weight: | 0,37 kg |
| Dimensions ( Length × Width ): | 11,00 × 4,50 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/