Product Description
L76K GPS HAT for Raspberry Pi is an expansion board for satellite positioning in embedded systems. Its L76K module supports combined reception from multiple satellite systems as well as independent single-system positioning. The board is intended for developers of tracking devices, mobile data collection equipment and GIS applications.
Host connectivity uses the Raspberry Pi-compatible 40-pin GPIO header or USB through an integrated USB-to-UART converter. Raspberry Pi, Jetson and RDK boards are supported, and the board requires a 5 V supply. A GPS antenna and USB cable are included. Development examples are available for Raspberry Pi, Jetson, Arduino and STM32.
Highlights
- 40-pin GPIO header for Raspberry Pi, Jetson and RDK.
- GPS, BeiDou, GLONASS and QZSS with combined or independent positioning.
- Built-in low-noise amplifier to improve reception sensitivity.
- Built-in SAW filter for interference suppression.
- AGNSS support for assisted positioning.
Technical Features
- Receiver: L76K module with AT6558R chipset; 32 tracking and 72 acquisition channels.
- Satellite signals: GPS L1 C/A, BeiDou B1I, GLONASS L1 and QZSS L1 C/A.
- Interfaces: UART, USB through CP2102 and 40-pin GPIO; NMEA 0183 and CASIC protocols.
- UART baud rate: 4800 to 115200 bps; default 9600 bps.
- Update rate: 1 Hz by default, 5 Hz maximum.
- Position accuracy: 2.0 m CEP; speed accuracy: 0.1 m/s.
- Timing accuracy: 30 ns; maximum acceleration error: 0.1 m/s².
- Time to first fix: 30 s autonomous cold start, 5.5 s with AGNSS; hot start: 2 s.
- Sensitivity: acquisition −148 dBm, reacquisition −160 dBm, tracking −162 dBm.
- Supply: 5 V; continuous-mode current consumption below 55 mA.
- Operating temperature: −40 to 85 °C.
- Dimensions: 65.00 × 30.50 mm.
Application Areas
- Vehicle tracking with periodic position and speed measurements.
- Asset tracking using satellite-derived position data.
- Integration of positioning into security systems.
- Mobile GIS data collection with industrial handheld devices.
Notes
- The battery holder supports an ML1220 rechargeable cell for preserving ephemeris data and enabling hot starts.
- The UART selection jumper determines the connection between the L76K, Raspberry Pi and USB-to-UART converter.
What's Included
- 1 x L76K-GPS-HAT
- 1 x GPS antenna
- 1 x 2×20-pin header
- 1 x USB Type-A to Micro-B cable
- 1 x screw pack
| Item information | Value |
|---|---|
| GTIN: | 4060137024337 |
| HAN: | 31932 |
| Category: | Wireless |
| Compatible Host SBC: | Raspberry Pi / Jetson / RDK |
| Supported Gnss Constellations: | GPS / BeiDou (BDS) / GLONASS / QZSS |
| Backup Battery Connector: | ML1220 battery holder |
| Baud Rate: | 9600 |
| GNSS Receiver Chipset: | AT6558R |
| Concurrent Constellation Reception: | Ja |
| Board Width: | 30.5 |
| Board Current Max: | 55 |
| Shipping weight: | 0,20 kg |
| Item weight: | 0,17 kg |
| Dimensions ( Length × Width × Height ): | 6,50 × 3,05 × 1,30 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/