Product Description
The ESP32-P4-Pico Development Board with KIT is based on the ESP32-P4 and supports the development of multimedia applications, human-machine interfaces and local image processing. The KIT includes a camera, speaker and connection cables. RISC-V processors and hardware functions for image and voice processing provide the basis for implementing these prototypes.
Cameras and displays connect through MIPI-CSI and MIPI-DSI respectively. A 40-pin GPIO header and serial interfaces support additional peripherals. The USB Type-C port provides power, programming and debugging. A separate USB connection supports OTG operation, while the GPIO pinout is compatible with some Raspberry Pi Pico HATs.
Highlights
- 32-bit RISC-V processors with dual-core and single-core configurations
- 128 KB HP ROM, 16 KB LP ROM, 768 KB HP L2MEM, 32 KB LP SRAM and 8 KB TCM
- Image and voice processing with JPEG codec, pixel accelerator, image signal processor and H.264 encoder
- 32 MB in-package PSRAM and 32 MB onboard NOR flash
- Multimedia connections including MIPI-CSI, MIPI-DSI, USB OTG, microSD slot, microphone and speaker header
Technical Features
- Main chip: ESP32-P4NRW32; dual-core RISC-V processor running at up to 400 MHz
- Working memory: 32 MB PSRAM
- Flash memory: 32 MB NOR flash
- Interfaces: 2-lane MIPI-CSI and MIPI-DSI, USB 2.0 HS OTG, SDIO 3.0, SPI, I2S, I2C, UART, TWAI, PWM, RMT and ADC
- GPIO connection: 2 × 20 pins with 27 remaining programmable GPIOs
- Power, programming and debugging connection: USB Type-C
- Camera: OV5647, 5 MP, manual focus, F2.0 aperture, 6 mm focal length and 43° field of view
- Speaker: 8 Ω, 2 W; board connector MX1.25 2P
- Supported DSI display sizes: 5, 7, 8 and 10.1 inches
- KIT included: yes
Application Areas
- Build image-processing prototypes using the included OV5647 camera.
- Develop user interfaces with a MIPI-DSI display.
- Test audio applications using the onboard microphone and included speaker.
- Connect peripherals through the GPIO header and serial interfaces.
Notes
- A DSI display is not included.
- The GPIO header is compatible with only some Raspberry Pi Pico HATs.
- The included camera does not support night vision.
What's Included
- 1 × ESP32-P4-Pico-M
- 1 × speaker, 8 Ω, 2 W
- 1 × Pi5-Camera-Cable-200mm
- 1 × FFC 15PIN cable
- 1 × RPi Camera (B)
- 1 × MX1.25 4PIN to USB cable
| Item information | Value |
|---|---|
| GTIN: | 4060137027093 |
| HAN: | 32100 |
| Category: | Board & Kit |
| Controller-IC: | ESP32-P4NRW32 |
| Manufacturer Part Number: | 32100 |
| Digital Interface Protocols: | MIPI-CSI, MIPI-DSI, USB 2.0 OTG, SDIO 3.0, SPI, I2S, I2C, UART, TWAI |
| Interface Type: | MIPI-CSI, MIPI-DSI, USB 2.0 HS OTG, SDIO 3.0, SPI, I2S, I2C, UART, TWAI, PWM, RMT, ADC |
| CPU Architecture: | 32-bit RISC-V |
| microSD Card Slot: | Ja |
| Camera Support: | Ja |
| Display Interface Type: | MIPI-DSI (2-lane) |
| SRAM Memory: | 32 |
| USB Device Support: | Ja |
| USB Host Support: | Ja |
| USB Version: | 2highspeedotg |
| CPU Core Count: | 3 |
| Flash Memory: | 32 |
| PSRAM: | 32 |
| CPU Clock Frequency Max.: | 400 |
| GPIO Count: | 27 |
| Effective Resolution: | 5 |
| Compatible Camera Sensor: | OV5647 |
| CPU Configuration: | Dual-core HP RISC-V + single-core LP RISC-V |
| MCU Family: | ESP32 |
| MCU Series: | ESP32-P4 |
| Target MCU Part Number: | ESP32-P4NRW32 |
| Debug/Programming Interface: | USB Type-C |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Dimensions ( Length × Width × Height ): | 5,73 × 2,10 × 1,10 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/