Product Description
Variant: UART Fingerprint Sensor (E).
Rectangle-shaped Capacitive Fingerprint Sensor (E) from Waveshare combines a touch-sensitive sensor and a Cortex processor for fingerprint verification. It is intended for developers of compact access solutions and handles fingerprint enrollment, image acquisition, feature extraction and matching. Processing takes place within the sensor, so the connected controller does not need to implement the fingerprint algorithm itself.
Control uses UART commands, allowing connection to platforms such as STM32 and Raspberry Pi. Operation requires a 3.3 V supply. An embedded touch sensor wakes the processor from its automatically activated sleep mode when a finger touches the collecting surface.
Highlights
- Control through simple UART commands without implementing the fingerprint algorithm.
- Integrated algorithm for enrollment, matching, image acquisition and fingerprint feature uploading.
- Capacitive detection by lightly touching the collecting surface.
- Processor and sensor integrated in one chip with automatic sleep and touch wake-up.
- UART connector for connection to platforms such as STM32 and Raspberry Pi.
Technical Features
- Processing: Cortex processor.
- Image acquisition: 508 DPI, 160 × 160 pixels, 8 grayscale levels.
- Sensor dimensions: 11.2 × 12.2 mm.
- Storage capacity: 3000 fingerprints.
- Matching time: <200 ms for 1:N with N ≤ 100.
- False acceptance rate: <0.001%; false rejection rate: <0.1%.
- Interface: UART at 19200 bps.
- Operating voltage: 3.3 V.
- Operating current: <50 mA.
- Sleep current: <16 µA.
- ESD resistance: 8 kV contact discharge, 15 kV air discharge.
- Operating environment: −20 to 70 °C, 40 to 85% relative humidity.
Application Areas
- Fingerprint-based access controls using locally stored fingerprints.
- Compact fingerprint locks with touch-activated acquisition.
- STM32 or Raspberry Pi projects for user verification over UART.
Notes
- Operating and storage environments must remain free of condensation.
- Storage conditions: −40 to 85 °C at less than 85% relative humidity.
- The matching time below 200 ms applies to a 1:N search with no more than 100 entries.
What's Included
- 1 x UART Fingerprint Sensor (E)
- 1 x 6PIN squid wire
| Item information | Value |
|---|---|
| GTIN: | 4060137302411 |
| HAN: | 22059 |
| Category: | Sensors |
| Manufacturer Part Number: | 22059 |
| Interface Type: | UART |
| Fingerprint Sensing Technology: | capacitive |
| Fingerprint Resolution: | 508 |
| Fingerprint Image Width: | 160 |
| Fingerprint Image Height: | 160 |
| Fingerprint Capacity: | 3000 |
| CPU Architecture: | Cortex |
| Fingerprint Algorithm Functions: | Enrollment, image acquisition, feature extraction, matching, feature uploading |
| Touch Wake Sensor: | Ja |
| Baud Rate: | 19200 |
| Operating Temperature Min.: | -20 |
| Operating Temperature Max.: | 70 |
| Operating Humidity: | 85 |
| Operating Current: | 50 |
| Matching Time: | <200 ms (1:N, N≤100) |
| Cable Pin Count: | 6 |
| Module Function: | Fingerprint enrollment and verification |
| False Acceptance Rate: | <0.001% |
| False Rejection Rate: | <0.1% |
| ESD Protection Rating: | 8 kV contact / 15 kV air |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
| Dimensions ( Length × Width × Height ): | 3,34 × 2,04 × 0,58 cm |
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/