Product Description
Twisted Servo Y Splitter Cable 12" Female - 2x Male connects two servos to a single servo port on an RC receiver or servo controller. Its single JR female connector branches into two Futaba J male connectors. The ends support both JR-style and Futaba connections, allowing use within either system or as an adapter between them. The split sits close to the input connector so that the two output ends can be positioned apart.
Highlights
- Connects two servos to a single servo port.
- Compatible with JR and Futaba connections and usable as an adapter between both systems.
- Input-side split allows output ends to be separated by approximately 450 mm.
- Each conductor contains 60 strands for greater flexibility than standard servo cables.
- Twisted wires reduce electromagnetic interference.
Technical Features
- Cable length: 12 inches or 300 mm.
- Configuration: one female to two male connectors, Y splitter.
- Input: one 3-pin JR female connector.
- Outputs: two 3-pin Futaba J male connectors.
- Contact spacing: 0.1 inches or 2.54 mm.
- Wire size: 22 AWG, with 60 strands per conductor.
- Wire arrangement: three twisted conductors.
- Contacts: gold-flashed.
- Maximum separation between output ends: approximately 18 inches or 450 mm.
Application Areas
- Connecting two servos to a shared servo output on an RC receiver.
- Splitting a servo controller port between two servos.
- Connecting components with JR and Futaba J connectors within servo wiring.
Notes
- Female and male refer to the contacts: the JR female connector is often called male in the RC hobby industry, while the shrouded Futaba J male connectors are often called female.
- The JR female connector fits male headers with 2.54 mm spacing.
- The usual servo color convention is brown or black for ground, red for power, and orange, yellow, white, or blue for the control signal.
What's Included
- 1 x Twisted Servo Y Splitter Cable 12" Female - 2x Male, 300 mm.
| Item information | Value |
|---|---|
| GTIN: | 4060137043598 |
| HAN: | 2163 |
| Category: | Miscellaneous |
| Connector Ecosystem: | JR / Futaba |
| Connector Type: | JR / Futaba J |
| Connector Pin Count: | 3 |
| Conductor Count: | 3 |
| Cable Length: | 300 |
| Header Pitch: | 2.54 |
| Wire Harness Configuration: | Y: 1x Female - 2x Male |
| End A Connector Description: | 1x JR female, 3-pin |
| End B Connector Description: | 2x Futaba J male, 3-pin |
| Shipping weight: | 0,01 kg |
| Item weight: | 0,01 kg |
Pololu Corporation, Pilot Rd. 920, 89119 Las Vegas, Nevada, Vereinigte Staaten, [email protected], https://www.pololu.com/