Open Arms Mini Bimanual Leader Arm Set
2×7 DOF + dual grippers|Compatible with OpenArm Follower and Hugging Face LeRobot
Product Overview
Open Arms Mini Leader is a lightweight bimanual teleoperation leader system consisting of one left and one right independent leader arm. It is suitable for robotic teleoperation, motion demonstration, demonstration data collection, imitation learning, and embodied AI research.
Each leader arm has 7 human-like joint axes plus one gripper input and uses 8 Feetech STS3215-C046 bus servos. The bimanual set includes 14 arm joint axes, 2 gripper inputs, and 16 servos in total.
During use, the operator directly moves the leader arm. The system reads the positions of the shoulder, elbow, forearm, wrist, and gripper and maps them via LeRobot to a compatible follower robotic arm. The leader is a motion input device, not a payload-bearing robotic arm and not a force-feedback controller.
The design uses a lightweight, low-inertia 3D-printed structure suitable for continuous manual operation. The wrist grip is equipped with a strap that reduces hand slippage during wrist roll movements and improves operating stability.
Open-source project reference:
https://github.com/pkooij/open-arms-mini
Key Features
- Bimanual leader set: one left arm and one right arm
- 7 DOF per arm plus one gripper input
- 16 Feetech STS3215-C046 servos in total
- Human-like joint layout: 3 shoulder joints, 1 elbow joint, 1 forearm rotation, and 2 wrist joints
- Lightweight and low-inertia, suitable for fast motion input and fine tabletop tasks
- Each arm with its own wrist grip and elastic strap
- One Waveshare Serial Bus Servo Driver Board per arm
- Both leader arms connect to the computer via separate USB serial ports
- Supports the LeRobot
openarm_miniteleoperator for single-arm use - Supports the LeRobot
bi_openarm_miniteleoperator for bimanual use - Compatible with the OpenArm Follower configuration in LeRobot
- Each leader arm has its own serial number and basic test report
Technical Specifications
| Item | Specification |
|---|---|
| Product type | Bimanual leader arm / teleoperation input device |
| Configuration | 1 left arm, 1 right arm |
| Degrees of freedom per arm | 7 arm joint axes + 1 gripper input |
| Bimanual input channels | 14 arm joint axes + 2 gripper inputs |
| Servos per arm | 8 |
| Total servos | 16 |
| Servo model | Feetech STS3215-C046 |
| Servo specification | 7.4 V, 1:147 gear ratio |
| Joint structure | Shoulder pan, shoulder lift, shoulder roll, elbow flex, forearm rotation, wrist pitch, wrist roll, gripper |
| Control board | Waveshare Serial Bus Servo Driver Board, 1 per arm |
| Communication | USB serial, 1 independent port per arm |
| Power supply | 7.5 V DC per arm |
| Included power adapter | 1× 7.5 V / 3 A per arm, 2 total |
| Operation | Manual movement of the leader arm, reading joint positions |
| Software interface | LeRobot openarm_mini / bi_openarm_mini
|
| Recommended environment | Linux; exact requirements depend on the LeRobot version and follower configuration |
Scope of Delivery
- 1× assembled bimanual leader system
- 1 left arm
- 1 right arm
- 16 Feetech STS3215-C046 servos
- 2 wrist grips with straps
- Servo connection cables and fastening hardware
- 2× Waveshare Serial Bus Servo Driver Boards
- 2× 7.5 V / 3 A power adapters
- 2× USB-A to USB-C data cables
- 1× base aluminum profile with connectors and fastening hardware
- 2× basic test reports, one for the left arm and one for the right arm
Each leader arm undergoes basic functional testing before shipment. Calibration according to the LeRobot documentation is required before first use.
Compatibility and Prerequisites
This product is primarily intended for the OpenArm Follower configuration in LeRobot. A compatible Linux computer with a suitable LeRobot version installed is required. The serial ports of both leader arms, the follower communication interface, arm side (left/right), and device IDs must be configured. Before first use, each leader arm must be calibrated according to the LeRobot documentation.
When used with follower models from other manufacturers, joint names, directions, ranges, gripper mapping, and control interfaces must be verified.
Important Notes
This product is a leader arm for capturing operator motion and controlling a follower arm. It is not a follower robotic arm:
- Not intended for carrying or transporting payloads
- Does not provide end-effector payload capacity
- Not to be used as industrial safety equipment
- No force feedback or bidirectional haptic feedback is promised in the standard delivery
- Actual teleoperation performance also depends on the follower, control frequency, network latency, computer performance, and software configuration
Safety
- Securely mount the base on a table or fixture before use
- Disconnect power before adjusting the structure, wiring, or servo IDs
- Beware of pinch hazards near joints and the gripper during operation
- Use only the matching 7.5 V power adapter for each leader arm
- Avoid reverse polarity, overvoltage, short circuits, and plugging or unplugging servo cables while powered
- Before the first teleoperation, check the left/right arm settings, joint directions, zero position, and gripper range
- The follower must be securely mounted; an easily accessible emergency stop is recommended
- For initial setup, reducing follower speed and range of motion is recommended
Open-Source and Compatibility Notice
Open Arms Mini is an open-source hardware reference project published by the upstream authors. Eckstein has carried out compatible manufacturing, assembly, calibration, and basic testing based on publicly available CAD, STL, STEP, BOM, and software interfaces.
This product is not an official product of the Open Arms Mini project author, the OpenARM project, or Hugging Face LeRobot and is not certified or endorsed by these projects. The names mentioned are used solely to describe the design source and software compatibility.
Eckstein Robot