Pololu 34:1 Metal Gearmotor 25Dx52L mm HP 12V brushed DC motor

Pololu 34:1 Metal Gearmotor 25Dx52L mm HP 12V brushed DC motor

34,95 € (Net 29,37 € )

In stock

incl. 19% VAT , plus (L)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Available immediately
Delivery time: 6 - 8 Workdays (DE - int. shipments may differ)

SKU: PO3204
GTIN: 4060137055201
Category: I-Form
Manufacturers: Pololu
MPN: 3204
Storage Tiers: Maintain

This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 34.014:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. This gearmotor is also available with an integrated encoder.

Exact gear ratio: 22×20×22×22×23 / 12×12×10×10×10 ? 34.014:1

Key specifications

voltage: 12 V
no-load performance: 300 RPM, 250 mA
stall extrapolation: 11 kg?cm (150 oz?in), 5.0 A

Dimensions

Size:25D x 52L mm(Length measurement is from gearbox face plate to back of motor (it does not include the output shaft or motor terminals).)
Weight:88g
Shaft diameter:4 mm(D shaft)

General specifications

Gear ratio: 34.014:1
No-load speed @ 12V: 300 rpm(Typical; ±20%)
No-load current @ 12V: 0.25 A(Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.)
Stall current @ 12V: 5.0 A
Stall torque @ 12V: 11 kg·cm(Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.)
Max output power @ 12V: 8.9 W
No-load speed @ 6V: 150 rpm
Stall current @ 6V: 2.5 A
Stall torque @ 6V: 5.5 kg·cm(This motor will run at 6 V but is intended for operation at 12 V.)
Motor type: 12V, 5.0A stall (HP 12V)

Performance at maximum efficiency

Max efficiency @ 12V: 44 %
Speed at max efficiency: 260 rpm
Torque at max efficiency: 1.6 kg·cm
Current at max efficiency: 0.82 A
Output power at max efficiency: 4.3 W

General specifications

Encoders?: N

Storage Tiers:	Maintain
Dimension (mm):	25D
Max Power (W):	8.9
Form/Type:	High-Power (HP)
Encoder:	Without
Stall Current (A):	5
Stall Torque (kg-cm):	11
Rated Voltage (V):	12
Gear Ratio:	34:1
Shaft:	Single
No-Load Speed (RPM):	300
No-Load Current (A):	0.25
Shipping weight:	0,10 kg
Item weight:	0,08 kg
Dimensions ( Length × Width × Height ):	5,20 × 2,50 × 2,50 cm