Pololu 298:1 Micro Metal Gearmotor LP 6V 45RPM

Pololu 298:1 Micro Metal Gearmotor LP 6V 45RPM

23,95 € (Net 20,13 €)

incl. 19% VAT , plus (M)

Choose tax zone / country of delivery

pack

Product customisation & sourcing & PCBA one-stop service are available with us.

Request personal offer!

Orderable, information on delivery time as follows, otherwise please enquire.
Delivery time: 6 - 8 Workdays (Other countries)

SKU: PO1094
GTIN: 4060137051265
Category: Micro Gearmotor
Manufacturers: Pololu
MPN: 1094
Storage Tiers: Maintain

Overview

These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V and 12 V HPCB motors offer the same performance at their respective nominal voltages, just with the 12 V motor drawing half the current of the 6 V motor. The 6 V HPCB and 6 V HP motors are identical except for their brushes, which only affect the lifetime of the motor.

The HPCB versions (shown on the left in the picture below) can be differentiated from versions with precious metal brushes (shown on the right) by their copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

Dimensions

Size:10 × 12 × 26 mm¹
Weight:9.5 g
Shaft diameter:3 mm²

General specifications

Gear ratio:297.92:1
No-load speed @ 6V:45 rpm
No-load current @ 6V:0.02 A
Stall current @ 6V:0.36 A
Stall torque @ 6V:2.0 kg·cm
Max output power @ 6V:0.22 W
Extended motor shaft?:N
Motor type:0.36A stall @ 6V (LP 6V)

Performance at maximum efficiency

Max efficiency @ 6V:27 %
Speed at max efficiency:34 rpm
Torque at max efficiency:0.44 kg·cm
Current at max efficiency:0.09 A
Output power at max efficiency:0.15 W

Notes:

1.Output shaft adds 9 mm to the 26 mm length.
2.D shaft.

Storage Tiers:	Maintain
Dimension (mm):	10x12 Micro
Form/Type:	Low-Power (LP)
Max Power (W):	0.22
Encoder:	Without
Stall Current (A):	0.36
Stall Torque (kg-cm):	2.0
Rated Voltage (V):	6
Gear Ratio:	298:1
Shaft:	Single
No-Load Speed (RPM):	45
No-Load Current (A):	0,04
Shipping weight:	0,01 kg
Item weight:	0,01 kg
Dimensions ( Length × Width × Height ):	2,60 × 1,20 × 1,00 cm