World Trade Plaza south side, Fuhong Rd, Futian District
Shenzhen, China, 518000
[email protected]
https://waveshare.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
GTIN: | 4060137074172 |
HAN: | 20681 |
Category: | IoT & Smart Home |
Storage Tiers: | Maintain |
Shipping weight: | 0,17 kg |
Item weight: | 0,14 kg |
Dimensions ( Length × Width × Height ): | 6,50 × 3,10 × 0,90 cm |
This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.
Features at a glance
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.
- Supports GNSS positioning (GPS, BeiDou, GLONASS)
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0Ω resistor
- SIM card slot, compatible with both normal SIM card and NB-IoT specific card
- 2x LED indicators, easy to monitor the working status
- Baudrate: 300bps~3686400bps (115200bps by default)
- Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USAT
- Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
NB-IoT / Cat-M / 2G
Frequency bands
- NB-IoT: B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28
- Cat-M: B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B25, B26, B28, B39
- GPRS/EDGE: 850, 900, 1800, 1900MHz
Data rate
- NB-IoT: 34(DL)/66(UL)
- Cat-M: 300(DL)/375(UL)
- EDGE: 236.8(DL)/236.8(UL)
- GPRS: 85.6(DL)/85.6(UL)
SIM card support
- NB-IoT: NB Specific (Not Included)
- Cat-M/GPRS/EDGE: Normal SIM (Not Included)
Applicable region: Global
GNSS
- Satellite systems: GPS, BeiDou, GLONASS
- Receiver type: 16-channel, C/A Code
- Sensitivity: Tracking: -162 dBm (GPS) / -157 dBm (GLONASS) / TBD (BD), Cold starts: -148 dBm
- Time-To-First-Fix: Cold starts: <35s, Hot starts: <1s
- Accuracy: Position: <2.5m CEP
Other
- Power supply: 5V
- Operating voltage: 5V / 3.3V (3.3V by default)
- Sleep Mode current: 1.2mA (@DRX=2.56s)
- Power Save Mode current: 9uA
- Operating temperature: -40°C ~ 85°C
- Storage temperature: -45°C ~ 90°C
- Dimensions: 30.2mm x 65mm
WIKI: www.waveshare.com/wiki/SIM7000G_NB-IoT_HAT
Lieferumfang
- SIM7000G NB-IoT HAT x1
- GSM Antenna x1
- GPS External Antenna (B) x1
- USB-A to Micro-B cable x1
- Standoffs pack x1
Wiki
Manufacturer according to GPSR
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de