World Trade Plaza south side, Fuhong Rd, Futian District
Shenzhen, China, 518000
[email protected]
https://waveshare.com/
Am Ostbahnhof 3
Niedersachsen
Clausthal-Zellerfeld, Deutschland, 38678
[email protected]
https://eckstein-shop.de
The R800C GSM/GPRS HAT is a handy, low power Raspberry Pi HAT which features multi-communication functionalities: GSM, GPRS, and phone call, applicable to countries or regions with 2G network coverage, up to 85.6kbps GPRS speed. It allows your Pi to easily make a telephone call, send messages, connect to wireless Internet, and so on.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards and Jetson Nano
- Supports SMS, phone call, GPRS, TCP/IP, DTMF, HTTP, FTPl, etc.
- UART interface, for connecting controller boards like Arduino/STM32
- Onboard voltage translator, 3.3V by default, switch to 5V via jumper
- 2x LED indicators, easy to monitor the working status
- SIM card slot, supports 1.8V/3V SIM card
- Baudrate: 2400bps ~ 115200bps (115200bps by default)
- Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)
- Supports SIM application toolkit: GSM 11.14 Release 99
GSM / GPRS / Audio
- Frequency band
- GSM: 850/900/1800/1900 MHz
- Quad-band auto search
- Compliant to GSM phase 2/2+
- Emitting power
- Class 4 (2W @ 900 MHz)
- Class 1 (1W @ 1800 MHz)
- GPRS connectivity
- GPRS multi-slot class 12/10 (default)
- GPRS multi-slot class 1~12 (configurable)
- GPRS data feature
- UL/DL speed: ?85.6kbps
- Supports Packet Broadcast Control Channel (PBCCH)
- Coding schemes: CS-1, CS-2, CS-3, CS-4
- Supports PAP (Password Authentication Protocol) for PPP connection
- Supports Unstructured Supplementary Service Data (USSD)
- SMS Supports
- MT, MO, CB, Text, PDU
- SMS storage: SIM card
- Audio
- Voice encode/decode mode: Half Rate, Full Rate, Enhanced Full Rate, Adaptive Multi Rate
- Support echo cancellation
- Support noise reduction
Others
- Power supply: 5V
- Logic level: 5V / 3.3V (default)
- Operating temperature: -40°C ~ 85°C
- Storage temperature: -45°C ~ 90°C
- Dimensions: 30.2 x 65mm
What's on board
- R800C module
- RT9193-33 power chip
- MIC29302 power chip
- TXS0108EPWR voltage translator translates 3.3V/5V into 1.8V
- Raspberry Pi GPIO Header for connecting with Raspberry Pi
- Operating voltage selection jumper VCC-3.3V: set operating voltage as 3.3VVCC-5V: set operating voltage as 5V
- PWR selection jumper PWR-P4: startup/shutdown by the Raspberry Pi P4 pin
- 3.5mm earphone/mic jack
- R800C control header for easily connecting with host boards like STM32
- GSM Antenna Connector
- SIM Card slot
- R800C power on/off Press for 1s to start up the R800C.Press for 1s to shutdown the R800C after booting
- NET Indicator Fast flashing when module starts, flashing slowly after GSM register succeed
- Power Indicator
WIKI:www.waveshare.com/wiki/R800C_GSM/GPRS_HAT
Lieferumfang
- R800C GSM/GPRS HAT x1
- GSM Antenna x1
- RPi screws pack (2pcs) x1
Wiki
Manufacturer according to GPSR
Waveshare International Limited, World Trade Plaza south side, Fuhong Rd, Futian District, 518000 Shenzhen, China, [email protected], https://waveshare.com/
Responsible person according to GPSR
Eckstein GmbH, Am Ostbahnhof 3, 38678 Clausthal-Zellerfeld, Niedersachsen, Deutschland, [email protected], https://eckstein-shop.de